ST STM32303C-EVAL Operation & User’s Manual

1/58 UM1567 User manual STM32303C-EVAL evaluation board Introduction The STM32303C-EVAL evaluation board has been designed as a complete demonstration and development platform for STMicroelectronic's ARM cortex-M4 core-based STM32F303VCT6 microcontrollers. It features two I2Cs, three SPIs, five USARTs, one CAN, four 12-bit A ...

Contents 1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 1.2 Demonstration software . . . . . . . . . . . . . . . . . . . . . . . . . . ...

3/58 3.2 Motor control connector (CN2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 3.3 CAN D-type 9-pin male connector (CN3) . . . . . . . . . . . . . . . . . . . . . . . . . 28 3.4 Motor control connector (CN4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 3.5 ST-LINK/V2 USB ...

UM1567 4/58 Doc ID 023581 Rev 2 List of tables Table 1. Applicable tools. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table 2. Third-party support of ST-LINK/V2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Table 3. Power supply ...

Doc ID 023581 Rev 2 5/58 List of figures Figure 1. STM32303C-EVAL evaluation board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Figure 2. Hardware block diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Figure 3. STM32303C-EVAL evalu ...

1 Overview 1.1 Features ■ Four 5 V power supply options: Power jack, ST-LINK/V2 USB connector, User USB connector or daughter board ■ I2S Audio DAC, stereo audio jack which supports headset with microphone ■ 2-Gbyte or more SPI interface MicroSD card ■ I2C compatible serial interface temperature sensor, EEPROM ...

7/58 1.4 Delivery recommendations Before using the board for the first time, please verify that nothing was damaged during shipment and that no components are unplugged or lost. When the board is extracted from its plastic bag, please check that no component remains in the bag. The main components to verify are: 1. The 8 M ...

UM1567 8/58 Doc ID 023581 Rev 2 2 Hardware layout and configuration The STM32303C-EVAL evaluation board has been designed around the STM32F303VCT6 microcontroller (100-pin TQFP package). The hardware block diagram in Figure 2 illustrates the connection between the STM32F303VCT6 microcontroller and its peripherals (color LCD, ...

Doc ID 023581 Rev 2 9/58 Figure 3. STM32303C-EVAL evaluation board layout .. ...

UM1567 10/58 Doc ID 023581 Rev 2 2.1 Development and debug support Version 2 of ST-LINK, called ST-LINK/V2, is embedded on the board. This tool allows program loading and debugging of the STM32 on board using a JTAG or SWD interface. The third-party debug tools are also supported by the JTAG/SWD connector, CN10, or the ETM T ...