Squareled PQ1036 Operation & User’s Manual

Summarize Thank you for purchasing our LED PAR lighting. Please read these instructions carefully before begin and operate the fixtures according to these instructions to avoid any possible damages and accidents causes by misusage. Products introduce This led par color-changing projecting light is covered by high strength die- casting aluminum which is able to endure high temperature, designed in a fashion ...

! Always make sure disconnect from the power source before setting up, serving and moving;. ! Avoid direct eye exposure to the fixture when it is on; Safety instruction » Make sure the power supply voltage are consistent with this lights » Ensure the use of voltage is in the range of the request technical parameter. » before the installation, please check the light’s f ...

Order number Item Quantity Remarks Order number Item Quantity Remarks 1 Front cover 1 11 Power main board bracket 1 2 Glass 1 12 Main board 1 3 Glass waterproof silicone 1 13 Display platen 1 4 Lens plate 1 14 display 1 5 Lamp panel 1 15 Silica gel tabletting 1 6 bulb holder 1 16 waterproof silicone 7 bracket 1 set 2PCS 17 Bottom base 1 8 Bottom case cover 1 18 wire clip 1 9 Bottom case waterproof silicone 1 19 bumper bracket ...

» unique cooling mode: natural convection » DMX512 Controller, 4 button set DMX ID address with led display » master slave/interconnected multi-machine control » lens degree: 25º, 45º optional » using switching power supply to protect the LED to work well » R,G,B,W LED, dimmable separately » Strobe, gradual change, jumping change Main Function »3CH Channel DMX Value Control Function Remark ...

Remark 1CH 0-255 General dimming 2CH 0-255 Red Dimming 0——100% 3CH 0-255 Green Diming0——100% 4CH 0-255 Blue Dimming 0——100% 5CH 0-255 White 0——100% 6CH 0-14 Dimming When the 7CH above31, this function is invalid 15-255 Strobe Speed 7CH 0-31 Invalid 32-63 From dark to bright Must use CH1, 2, 3, 4, 5 otherwise no light. From the 8CH, start speed adjustment 64-95 From bright to dark 96-127 From dark— ...

used to select and store the current menu option. Press UP / DOWN to choose a desired menu item. Here are the operation details: » ”addr”: DMX mode (A001-A512) » “SLAV”:slave receive mode# » “CHNd”:DMX channel (3,4,5,8CH) » ”SP”; built-in program speed change model (SP00-SP15, SP00 is the fastest) »”Pr”; Built-in program (Pr00-Pr1 ...

»Press ENTER to access the menu items to select, the screen will now be glinting »Press UP/DOWN to change the DMX Channel: 3CH, 4CH, 5CH, 8CH » At last, press ENTER to confirm, if it delay for 3 seconds, DMX channel choosing will be saved, and go back to DMX receive mode(A001); If your press ENTER for short time or not press, delaying for 8 seconds, the DMX channel will select to be saved automatically, and th ...

XLR cable The standard connection way of the XRL is: one end connect to the male plug ,and the other connect to the female. Noted: In order to avoid failures and interference signal transmission, we connect a resistance120Ω (1/4W) at the end of the DMX connecting as below: The Conversion between 3pin and 5 pin XLR If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable. ...

Connecting picture: Great waterproof PAR lamp wiring diagram ...

Check the power source plug is in normal or not Check the switch of the lights is off or on Check the fuse if in normal DMX can not control it Check the DMX cable is connect to the lights or not Check the DMX512 controller work in normal or not Check the DMX cable is normal or not Check if the lights is in DMX mode(A001) Display not bright When connect to the electricity, did the led ...

»Output voltage: DC24V »Consume: 350W »Lamp Type: High Power LED(10w) »Lamp Spec: RGBW 4-in-1 LED(36 pcs) »Constant current drive: 500mA »Refresh Rate: 400HZ »Life Span: 50000~100000 hours »Control Signal: DMX512, master and slaver »Control mode: stand alone/ DMX/ master and slaver »Channel: 3,4,5,8 CH »Function Effect: dimmer, strobe, eotic, gradual c ...

Rudolf-Diesel-Str. 3, D-89312 Günzburg Telefon +49 (0) 82 21 207 98-0 Fax +49 (0) 82 21 207 98-69 E-Mail [email protected] Web www.lth-gmbh.de ...