DigiTech S200 Operation & User’s Manual

Please visit Digitech Studio on the World Wide Web at http://www.digitech.com User’s Guide ...

WATER AND MOISTURE: Appliance should not be used near water (e.g. near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc). Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. POWER SOURCES: The ap ...

Manufacturer’s Name: Digitech Studio Manufacturer’s Address: 8760 S. Sandy Parkway Sandy, Utah 84070, USA declares that the product: Product Name: S-200 Product Options: All conforms to the following Product Specifications: Safety: EN 60065 (1993) IEC 65 (1985) with Amendments 1, 2 & 3 EMC: EN 55013 (1990) EN 55020 (1991) Supple ...

Safety Information Declaration of Conformity................................................................I Table of Contents ............................................................................II Section 1 - Introduction Congratulations............................................................................1 Included Items .. ...

output routings. The S-200 offers a full palette of Studio digital effects that can accommodate any studio or live situation, making the S-200 a true power plant effects proc ...

1. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. Digitech Studio warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship ...

The Front Panel 1) Display - This large custom display is where you receive information for programming and operation of the S-200. This information includes: effect types and parameters and all Utility mode functions including Contrast, Dry level, MIDI program information, Factory Reset and Footswitch set-up. 2) Program Descriptio ...

1) Input Level- This knob controls the level of signal entering the S-200. For optimal performance, set this level so the Input level indicators (located on the front panel) occasionally peak the bargraph. 2) Left/Mono Input - This Input jack is used for the Left or Mono input. When only the Left input jack is used, the signal is sent to both ...

This section will provide you with all of the information necessary to help optimize the digital signal processing power of the S-200. Program Mode When the S-200 is in Program mode, you can move from one program to the next by either using the wheel, the optional Digitech FS-300 footswitch or incoming MIDI prog ...

The S-200 provides you with five different effect configurations that allow you ultimate flexibility and versatility in effect routing. The five effect configurations available in the S-200 are located in the Configuration menu and are as follows: Effect Configuration 1 uses one effect module because both processing engines ar ...