SPL Mercury Manual 

2 Package Contents 2 Product Registration 2 Introduction 3 Mastering D/A Converter in 120V Technology 3 Technical Aspects 4 120 Volt Technology 4 DLP120 4 120 Volt Technology – Diagram 5 Installation 6 Voltage Selection 6 First Steps 6 Cabling: Rear Side 7 XLR inputs and output 7 Graphic/Overview 8 Ground Lift switch ...

18 Contact 19 ...

Developer: Bastian Neu This manual includes a description of the product but no guarantee as for specific charac- teristics or successful results. Unless stated otherwise, everything herein corresponds to the technical status at the time of delivery of the product and user manual by SPL electronics GmbH. The design and circuitry are ...

The Mercury Mastering D/A Converter perfectly connects the SPL Mastering Universe to the digital world. Mercury�is�a�stereo�digital�to�analog�converter�that�fulfills�the�highest�demands�both�tech- nologically and tonally. Mercury provides connections for a total of seven di ...

SPL‘s goal was to push analog signal processing to the limits. That‘s why we combined the�best�possible�components�with�a�high-grade�optimized�circuit�design. We have been using the in-house developed 120 Volt technology - the highest-ever oper- ating voltage used for audio applications - in all o ...

These diagrams clearly show the advantages of our 120-volt technology in comparison to other circuits with a lower operating voltage. The direct relation between operating level and maximum level is fundamental for the classification: the higher the operating level, the higher the maximum level a circuit can ...

voltage selection corresponds to the values of your local power grid (230 or 115 volts). Inside the power connector, to the right, next to the on/off switch, there is an opening that displays the voltage selected. If the voltage indicated d ...

XLR inputs and outputs We used exclusively Switchcraft/Neutrik XLR input and output plugs to guarantee perfect connectivity in the studio. They provide an optimal connection thanks to their electrome- chanical design and large contact surface. The image shows the XLR connectors pinout. They are balanced and have three conduc- tors or wir ...

1 USB 2 Optical 1 and Optical 2 (TOSLINK) 3 Coaxial 1 and Coaxial 2 (S/P-DIF) 4 AES 1 5 AES 2 [DW L and DW R] 6 Word Clock 7 FIX OUT 8 VAR OUT 9 Ground-Lift (see details on page 7) 10 Voltage (see details on page 6) 8 9 10 ...