D-Link DHP-348AV Operation & User’s Manual
Text of D-Link DHP-348AV Operation & User’s Manual
D-Link DHP-348AV D-Link DHP-348AV User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or
D-Link DHP-348AV User Manual Table of Contents
Preface.................................................................................2
Manual Revisions...........................................................................2
Trademarks......................................................................................2
Product Overview...............................................................4
Package Contents.................................
D-Link DHP-348AV User Manual Section 1 - Product Overview
One D-Link DHP-310AV PowerLine AV Mini Adapter
One D-Link DHP-346AV PowerLine AV 4-Port Switch
Two CAT5 Ethernet Cables
CD-ROM with Software and User Manual
Power Cord
Quick Install Guide
System Requirements
Product Overview
Package Contents
Software Requirements*
• Windows® 7, Windows Vista®, XP (with Service Pack 3)
• PC with 233MHz Processor, 64MB Memory
• Ethernet Adapter (10/100Mbp
D-Link DHP-348AV User Manual Section 1 - Product Overview
Introduction
Features
• Use your home’s electrical wiring by plugging into existing power outlets
• Speeds of up to 200Mbps*
• Four 10/100 Ethernet Ports (DHP-346AV)
• One 10/100 Ethernet Port (DHP-310AV)
• Plug & Play, Easy Installation
• QoS support helps prioritize Internet traffic
• Supports 128-bit AES encryption for network security
• Push and secure encryption butt
D-Link DHP-348AV User Manual Section 1 - Product Overview
DHP-310AV Hardware Overview
LEDs
1
Power LED
• Solid - Indicates that the device is receiving electrical power.
• Blinking - Indicates that the device is setting itself up after reset or when
the security button was pressed or power saving mode enabled.
• Off - The device is not receiving electrical power.
2
PowerLine LED
• Solid - The device is connected to a PowerLine network.
• Blink
D-Link DHP-348AV User Manual Section 1 - Product Overview
DHP-310AV Hardware Overview
Connection
1
Ethernet Port
Connect the CAT5 Ethernet cable to the DHP-310AV Ethernet port.
2
Reset Button
Press and hold the button for 1 second to reset to factory default.
3
Simple Connect Button
Press to secure your network. Refer to page 11 for more information.
2
1
3
D-Link DHP-348AV User Manual Section 1 - Product Overview
DHP-346AV Hardware Overview
LEDs
1
Power LED
• Solid - Indicates that the device is receiving electrical power.
• Blinking - Indicates that the device is setting itself up after reset or security button
was pressed or power saving mode enabled.
• Off - The device is not receiving electrical power.
2
PowerLine LED
• Solid - The device is connected to a PowerLine network.
• Blinking - The
D-Link DHP-348AV User Manual Section 1 - Product Overview
DHP-346AV Hardware Overview
Connection
1
Ethernet Ports (1-4)
Connect the CAT5 Ethernet cable to the selected Ethernet port in accordance to priority.
2
Simple Connect Button
Press to secure your network. Refer to page 11 for more information.
3
Reset Button
Press and hold the button for 1 second to reset to factory default.
4
Power Receptor
Receptor for the supplied power cord.
3
1
2
4
D-Link DHP-348AV User Manual Section 2 - Installation
DHP-346AV Ethernet Port Traffic Priority
When connecting devices to your Ethernet ports, be aware of the Quality of Service (QoS) priorities assigned to each port.
1
2
4
3
Port
Color
Description
1 & 2
Yellow
Both ports have medium priority and are best for networking data devices such as printers.
3
Purple
Has a high priority. You can connect devices such as game consoles to this port.
4
Light Green
D-Link DHP-348AV User Manual Section 2 - Installation
Hardware Installation
Step 1
Plug the PowerLine AV Mini Adapter (DHP-310AV) into an AC Wall outlet. Power source is confirmed when the Power LED on the DHP-310AV is
illuminated. Connect the included Ethernet cable to the network cable connector located on the PowerLine AV Mini Adapter and attach the other end of
the Ethernet cable to the network devices (e.g. Router). The adapter’s PowerLine LED in
D-Link DHP-348AV User Manual Section 2 - Installation
Step 3
Connect the included Ethernet cable to the network cable connector located on the PowerLine AV 4-Port Switch (DHP-346AV) and attach the other
end of the Ethernet cable to the game console, media player, Internet TV or Computer. Network Connectivity is confirmed when the PowerLine and
Ethernet LED indicators on the PowerLine AV 4-Port Switch are illuminated.
D-Link DHP-348AV User Manual Section 2 - Installation
Push Button Security
Understanding PowerLine AV Network Security
The PowerLine AV 4-Port Switch Mini Kit must use an identical encryption key for the network. The default encryption key for the PowerLine AV
4-Port Switch Mini Kit is HomePlugAV. PowerLine AV 4-Port Switch Mini Kits with a default encryption key can communicate with each other.
It is recommended to create a private encryption key for n
D-Link DHP-348AV User Manual Section 3 - Configuration
Using the Setup Wizard
Follow the simple steps below to run the Setup Wizard to guide you quickly through the installation process. Insert the D-Link DHP-348AV CD into
your CD-ROM drive. If the CD Autorun function does not automatically start on your computer, click Start > Run. In the Run command box type
“D:\autorun.exe”, where D: represents the drive letter of your CD-ROM. If it does start, p
D-Link DHP-348AV User Manual Section 3 - Configuration
Configuration
After you have completed the D-Link PowerLine AV Utility installation wizard, double-click the D-Link PowerLine AV Utility icon on your desktop to
start the configuration of the DHP-348AV.
The D-Link PowerLine AV Utility provides you the option of setting your own PowerLine network and the network information for the connected
PowerLine devices.
Double-click the D-Link PowerLine AV Uti
D-Link DHP-348AV User Manual Section 3 - Configuration
Shows the name of the devices that have been discovered.
The device’s name is initially set by the utility itself.
Shows if the device is local or remote.
Shows the network connection quality of the connected
device.
• Three squares - Suitable for HD video stream connection.
• Two squares - Suitable for SD video stream connection.
• One square - Suitable for data and Internet activity
connec