Dimplex LA 10MR Installation And Operating Instructions Manual

FD 8602 CE INSTALLATION and OPERATING INSTRUCTIONS Air-to-Water Heat Pump for Outdoor installation LA 6MR LA 12TR LA 8MR LA 16TR LA 10MR ...

1.3 Energy-Efficient Use of the Heat Pump 2 PURPOSE OF HEAT PUMP 4 2.1 Field of Application 2.2 Principle of Operation 3 SCOPE OF DELIVERY 4 3.1 Baseline Unit 3.2 Control Box 4 TRANSPORT 5 5 INSTALLATION 5 5.1 General 5.2 Condensate Line 6 MOUNTING 6 6.1 General 6.2 Heating- ...

electrical circuits have been disconnected from the power supply. During transport, the heat pump must not be tilted more than 45° (in either direction). Heat pump and transport pallet are only connected by the packaging film. The air intake and discharge openings must neither be c ...

SCOPE OF DELIVERY PURPOSE OF HEAT PUMP 2.1 Field of Application The air-to-water heat pump is intended for use in existing or newly built heating systems. The heat pump is designed for the cooling or heating of water for heating purposes and the supply of domestic hot water! The heat pump is suitable for mono-energetic and bivalent ope ...

must not be tilted more than 45° (in either direction). The unit should be transported to the final installation site on a wooden pallet. The heat pump can be transported either by means of a lift truck or using 3/4" pipes to be passed through the openings provided in the base pla ...

on the heat pump: - supply/return lines of the heating system - condensate drain - control lead to the remote control - power supply 6.2 Heating-Side Connection The connections on the heating side of the heat pump are provided with 1"external thread (flat sealing). When making ...

carried out by an after-sales service authorized by the manufacturer. Only then can an extended warranty period of 3 years in total be granted (cf. Warranty service). 7.2 Preparatory Steps Prior to commissioning, the following items need to be checked: - All connections o ...

The heat pump can be switched on and off by means of the remote control positioned inside the building. Switching off in this case means switching to a "standby" function, i.e. as long as the heat pump is supplied with mains power, the frost protection function of the heat pu ...

9.1 Care To protect the paint finish, avoid placing objects against or on the unit. The external parts of the heat pump can be wiped with a damp cloth and commercially available cleaning agents. Do not use any cleaning agents containing sand, soda, acid or chloride as these may damage the surface. To prevent malfunctions due to dirt deposit ...

MALFUNCTIONS / TROUBLESHOOTING DECOMMISSIONING Caution - Heating Contractors Depending on the water quality and quantity, in particular in the case of mixed installations and plastic pipes, mineral deposits (rust sludge, lime) may form impairing the proper functioning of the heating installation. A cause of this is the water hardness as we ...