sound4 Playout ULA8 Quick User Manual

In order to be able to enjoy all the benefits of owning your new SOUND4 product, please verify first that the latest software and firmware release were installed. Visit www.sound4.com/downloads software and firmware downloads, prior the installation. for the most recent 65 Aleksandar Stamboliyski Str., 8000 Burgas, Bulgaria Tel.: ...

distributions: � Lucid Lynx - 10.04 LTS � Precise Pangolin - 12.04 LTS � Trusty Tahr - 14.04 LTS � Xenial Xerus - 16.04 LTS � Bionic Beaver – 18.04 LTS Installation for a PC running compatible Ubuntu version: – Click on the following link ...

open the main control window. The Remote control software can maintain several devices at once. There are two options of adding a new device. Both are explained in details below. Software STEP 3 Scan interactive button STEP 3.1 1. Press the [Scan] button; 2. A window with all network interfaces on the PC wi ...

2. A new screen requiring the following information will appear: 3. If you are not aware of SOUND4's IP address, it can be seen via the front panel. When the Main screen is on, press the soft button labeled [INFO]. Then using the [Up] and [Down] buttons navigate to IP (2/4) where the IP address of the device will be depicted. 4. En ...

Successful Log-in STEP 3.3 License Upload STEP 4 There are two options of loading a new license/s. Both are explained in details below. Expired License STEP 4.1 If your license has expired, a warning message " Your main license has expired! Please contact SOUND4 for renew your ...

5. Once the process is completed, a notification message will appear: 6. Press [OK] and the Main control window will appear. 1. Open the Main control window and click on [Setup]. The setup menu will appear; 2. Scroll down with the cursor to the ADVANCED settings and press Upgrade Licenses. The Following window will appe ...

4. Go to the file directory, select the license and press [Open]. NOTE: All licenses are sent/provided in a ZIP file. It is not needed the file to be unzipped prior to their upload. They will be accepted by the program as they are. 5. Wait while the licenses are loaded; 6. Once the process is completed, press [OK] and close the Setu ...

LIVEWIRE+/AES67 Inputs Set-up 1. Click on the audio inputs section; 2. Enable the input by selecting [ON] with a click; 3. Select LAN mode by clicking on [LIVEWIRE ...]; 4. Define number of the Channel; 5. Select From/To Source mode; 6. Define the Name ma ...

If you need any assistance on our side, please visit: www.sound4.com Playout Matrix Setup STEP 5.2 In the main control window define the PCI inputs names, inputs and outputs levels and gains, control events and priorities of the sources. ...