SORG Loop RS User Manual Manual
Text of SORG Loop RS User Manual Manual
SORG Loop RS Instructions for use LoopSORG RS
1 of 48
2019-08-16
Unique people, unique solutions
ENG
Unique people, unique solutions
LoopSORG RS
Instructions for use LoopSORG RS
Instructions for use
2 of 48
Instructions for use LoopSORG RS
2019-08-16
Imprint
SORG Rollstuhltechnik GmbH + Co. KG
Benzstrasse 3-5
68794 Oberhausen-Rheinhausen / Germany
Phone +49 7254-9279-0
Fax
+49 7254-9279-10
E-Mail [email protected]
Web
www.sorgrollstuhltechnik.de
Revision status
2019-08-15
Technical status
Technical changes and misprints reserved. The
pictures in this Instructions for use can differ
from the actual equipment components. How-
ever, a corresp
Instructions for use LoopSORG RS 3 of 48
2019-08-16
1 Wheelchair overview
5
2 General information
6
2.1 Preface
6
2.2 General information regarding instruc-
tions for use
6
2.2.1 Signs and symbols
7
2.2.2 Intended purpose
8
2.2.3 Indication
8
2.2.4 Contraindication
9
2.3 General safety information
9
2.3.1 Loading and transport without
occupants
11
2.3.2 Transport of the wheelchair with
passengers in the motor vehicle
11
2.3.3 Other important
Instructions for use LoopSORG RS 5 of 48
2019-08-16
1 Wheelchair overview
1 Push bail
2 Headrest
3 Side guard
4 Seat cushion
5 Footrest
6 Caster fork
7 Swivel caster
8 Brake pressure bolt
9 Driving wheel
10 Handrim
11 Clamp lever height adjustment
push bail
12 Drum brake operating lever
13 Push bail
14 Tripping lever for (seating unit) tilt
mechanism
15 Eccentric clamp for angle adjustment
of push bail
16 Wheel cover
17 Driving wheel
18 Trigger
6 of 48
Instructions for use LoopSORG RS
2019-08-16
2 General information
2.2 General information regarding instructions for use
These instructions for use contain safety information and handling instructions that are neces-
sary for the correct use of the product.
All settings, adjustments and repairs beyond the scope of these instructions for use, and the
annual inspection, must be carried out by a qualified specialist dealer.
You can find more informa
Instructions for use LoopSORG RS 7 of 48
2019-08-16
2 General information
2.2.1 Signs and Symbols
ATTENTION! Warnings for per-
sonal Safety aspects that are of
the utmost importance.
CORRECT safety adjustment/ use
INCORRECT adjustment /use
NOT ALLOWED
References to additional/
continuing reading.
Setting or adjusting the angle
open/close
Turn clockwise
Turn
counterclockwise
steps to be done
at the same time
steps to be done after each other
Steps to be
8 of 48
Instructions for use LoopSORG RS
2019-08-16
2 General information
8
km/h
2.2.2 Intended purpose
The LoopSORGRRS is a growable wheelchair with a tilting function intended for indoor and out-
door use.
The wheelchair is designed solely for the transport of the person for whom it has been specially
adapted by a qualified specialist dealer.
Parents or authorised guardians must ensure that the information in the instructions for use is
followed for ch
Instructions for use LoopSORG RS 9 of 48
2019-08-16
2 General information
-10 to + 41°C
30 - 70%
x
y
Do not use the footrest(s) for getting in
and out of the wheelchair, The wheelchair
might tilt forward.
x >700 mm
y > x + 50 mm
!
2.3 General safety information
Before each use, check:
•
the frame, back tubes, add-on parts and accessories for visible damage, bending, cracks
or missing or loose screws,
•
the wheels and quick-release axles for tightnes
10 of 48
Instructions for use LoopSORG RS
2019-08-16
2 General information
max 7°
90°
Only negotiate stairs with the help of experienced assistants. The anti-tipper must be
deactivated when doing so. The wheelchair must always be carried by the frame only, never
by the seat shell, the extendable push handle(s), push bail, handle bar, leg supports and/or the
footrest(s)!
We strongly recommend the use of the
anti-tipper.
The anti-tipper must be deactivate
Instructions for use LoopSORG RS 11 of 48
2019-08-16
2 General information
2.3.1 Loading and transport without occupants
Make sure that the packing size you require is suitable and secure the wheelchair and all dis-
mantled components with sufficient load securing. The wheelchair is suitable for transport (land/
air) in principle. Inform yourself about suitable load securing precautions before wheelchair
transport.
Carrying points:
•
Frame tubes, rear
12 of 48
Instructions for use LoopSORG RS
2019-08-16
2 General information
(2)
(1)
90°
(B)
(A)
(3)
(4)
(D)
(C)
If the wheelchair is equipped with a back angle-adjustment or tilt mechanism, the occu-
pant must sit in an upright position at a 90° back angle during transport (3). Leg supports that
can be swung up must be adjusted to the lowest position.
(2)
(1)
Attachment points/methods for transport in motor vehicles
When using the wheelchair as a seat in
Instructions for use LoopSORG RS 13 of 48
2019-08-16
2 General information
> 42°C
°C
Corrosion protection
The product has been designed with corrosion protection in mind when selecting the materials
(e.g. plastic, aluminium, stainless steel). All materials prone to corrosion are surface-treated and
are therefore protected.
The wheelchair must be dried thoroughly if it becomes wet.
2.3.3 Other important information
The wheelchair has been tested and ve
SORG Loop RS 14 of 48
Instructions for use LoopSORG RS
2019-08-16
Combination with products from other manufacturers
The wheelchair must only be combined with the electric auxiliary drives approved by the
manufacturer. The supplier of the auxiliary system or the authorised specialist dealer is solely
responsible for restrictions or adaptations as well as the installation itself. Please ask the manu-
facturer of the auxiliary drives for the specific requirements.
The co
16 of 48
Instructions for use LoopSORG RS
2019-08-16
(2) After insertion, the locking ball (A) must be visibly protruding. Pull at least 1x after
each insertion to test whether the quick-release axle is engaged. It should no longer be possi-
ble to pull the wheels outwards.
3.1 Handling driving wheel
(1)
(2)
(2)
(A)
1.
1.
(1)
(1)
Frictional heat is generated by braking the wheels on the handrims.
Handrim covers can stretch when exposed to heat and become
Instructions for use LoopSORG RS 17 of 48
2019-08-16
3.1 Handling driving wheel
(4)
(2b)
(3a)
90°
1.
2.
(1)
(3b)
(1)
(2b)
(2a)
(2a)
2x
2x
2x
3.1.4 Double hand rim-wheels
Insert:
Remove: Proceed accordingly in reverse order
18 of 48
Instructions for use LoopSORG RS
2019-08-16
3.2 Handling swivel caster
Lock:
(3)
(3)
90°
(2)
1.
2.
90°
(2)
1.
2.
(1)
(1)
(1)
3.2.1 General information regarding swivel casters
Incorrectly adjusted swivel casters or excessive speed can cause the casters to flutter.
Immediately slow down at the first sign of fluttering and have the swivel casters readjusted by
a specialist dealer.
3.2.2 Caster track lock
Unlock: