SORG Vector User Manual Manual

Text of SORG Vector User Manual Manual

Instructions for use Vector & Vector BSA

1 of 48 2020-09-01 Unique people, unique solutions. en Unique people, unique solutions. Vector & Vector & Vector BSA Vector BSA Instructions for use Vector & Vector BSA Instructions for use Instructions for use ENG

2 of 48

Instructions for use Vector & Vector BSA 2020-09-01 Imprint SORG Rollstuhltechnik GmbH + Co. KG Benzstrasse 3-5 68794 Oberhausen-Rheinhausen / Germany Phone +49 7254-9279-0 Fax +49 7254-9279-10 E-Mail [email protected] Web www.sorgrollstuhltechnik.de Revision status 2020-09-01 Technical status Technical changes and misprints reserved. The pictures in this Instructions for use can differ from the actual equipment components. How- ever, a
Instructions for use Vector & Vector BSA 3 of 48 2020-09-01 1 Wheelchair overview 4 2 General information 5 2.1 Preface 5 2.2 General information regarding instructions for use 5 2.2.1 Signs and Symbols 6 2.2.2 Intended purpose 7 2.2.3 Indication 7 2.2.4 Contraindication 7 2.3 General safety information 8 2.3.1 Loading and transport without occu- pants 10 2.3.2 Transport of the wheelchair with pas- sengers in a motor vehicle 10 2.3.3 Other impo

4 of 48

Instructions for use Vector & Vector BSA 2020-09-01 1 Wheelchair overview 1 Push handles 2 Back 3 Clothes guard 4 Side guard 5 Brake lever 6 Anatomically shaped seat cushion 7 Brake pressing bolt 8 Frame 9 Foot plate (continuous) 10 Caster fork 11 Swivel caster 12 Driving wheel 13 Handrim 14 Quick-release axle 10 11 12 13 14 1 2 3 4 5 7 8 9 6 Vector BSA overview 1 Push handles 2 Back 3 Clothes guard 4 Side guard 5 Brake lever 6 Seat cushion 7 BSA
Instructions for use Vector & Vector BSA 5 of 48 2020-09-01 2 General information 2.2 General information regarding instructions for use These instructions for use contain safety information and handling instructions that are neces- sary for the correct use of the product. All settings, adjustments and repairs beyond the scope of these instructions for use, and the annual inspection, must be carried out by a qualified specialist dealer. You can find more

6 of 48

Instructions for use Vector & Vector BSA 2020-09-01 2 General information 2.2.1 Signs and Symbols ATTENTION! Warnings for per- sonal Safety aspects that are of the utmost importance. CORRECT safety adjustment/ use INCORRECT adjustment /use NOT ALLOWED References to additional/ con- tinuing reading. Setting or adjusting the angle open/close Turn clockwise Turn counterclockwise steps to be done at the same time steps to be done after each other Ste
Instructions for use Vector & Vector BSA 7 of 48 2020-09-01 2 General information 8 km/h 2.2.2 Intended purpose The Vector is a light and manoeuvrable active wheelchair designed for indoor and outdoor use. The Vector BSA also has a swing-back leg support. The wheelchair is designed solely for the transport of the person for whom it has been specially adapted by a qualified specialist dealer. Parents or authorised guardians must ensure that the informatio

8 of 48

Instructions for use Vector & Vector BSA 2020-09-01 2 General information -10 to + 41°C 30 - 70% x y Do not use the footrest(s) for getting in and out of the wheelchair. The wheelchair might tilt forward. x >700 mm y > x + 50 mm ! 2.3 General safety information Before each use, check: • the frame, back tubes, add-on parts and accessories for visible damage, bending, cracks or missing or loose screws, • the wheels and quick-release axles for
Instructions for use Vector & Vector BSA 9 of 48 2020-09-01 2 General information max 7° 90° Only negotiate stairs with the help of experienced assistants. The anti-tipper must be deactivated when doing so. The wheelchair must always be carried by the frame only, never by the seat shell, the extendable push handle(s), push bail, handle bar, leg supports and/or the footrest(s)! 90° 90° max 7°/ 12% max 7°/ 12% We strongly recommend the use of the anti

10 of 48

Instructions for use Vector & Vector BSA 2020-09-01 2 General information 2.3.1 Loading and transport without occupants Make sure that the packing size you require is suitable and secure the wheelchair and all dis- mantled components with sufficient load securing. The wheelchair is suitable for transport (land/ air) in principle. Inform yourself about suitable load securing precautions before wheelchair transport. Carrying points: • Stabiliser
Instructions for use Vector & Vector BSA 11 of 48 2020-09-01 2 General information (2) (1) 90° (B) (A) (3) (4) (D) (C) If the wheelchair is equipped with a back angle-adjustment or tilt mechanism, the occu- pant must sit in an upright position at a 90° back angle during transport (3). Leg supports that can be swung up must be adjusted to the lowest position. (2) (1) Attachment points/methods for transport in motor vehicles When using the wheelchair as a

12 of 48

Instructions for use Vector & Vector BSA 2020-09-01 2 General information > 42°C °C Corrosion protection The product has been designed with corrosion protection in mind when selecting the materials (e.g. plastic, aluminium, stainless steel). All materials prone to corrosion are surface-treated and are therefore protected. The wheelchair must be dried thoroughly if it becomes wet. 2.3.3 Other important information The seat shell­underframe ha
Instructions for use Vector & Vector BSA 13 of 48 2020-09-01 2 General information Combination with products from other manufacturers The wheelchair may only be combined with the electrical auxiliary drives approved by the manufacturer. The responsibility of restrictions or adjustmens as well as the attachment itself lies with the supplier of the additional system or the specialized retailer. Please ask about the conditions with the manufacturer of the au

14 of 48

Instructions for use Vector & Vector BSA 2020-09-01 (2) After insertion, the locking ball (A) must be visibly protruding. Pull at least 1x after each insertion to test whether the quick-release axle is engaged. It should no longer be possi- ble to pull the wheels outwards. 3.1 Handling driving wheel (1) (2) (2) (A) 1. 1. (1) (1) Frictional heat is generated by braking the wheels on the handrims. Handrim covers can stretch when exposed to heat and
Instructions for use Vector & Vector BSA 15 of 48 2020-09-01 3.1 Handling driving wheel (4) (3a) 90° 1. 2. (1) (3b) (1) (2b) (2a) (2) 2x 2x 2x 2x 2x 2x 3.1.4 Double hand rim-wheels Insert: Remove: Proceed accordingly in reverse order

16 of 48

Instructions for use Vector & Vector BSA 2020-09-01 3.2 Handling swivel caster Lock: (3) (3) 90° (2) 1. 2. 90° (2) 1. 2. (1) (1) (1) 3.2.1 General information regarding swivel casters Incorrectly adjusted swivel casters or excessive speed can cause the casters to flutter. Immediately slow down at the first sign of fluttering and have the swivel casters readjusted by a specialist dealer. 3.2.2 Caster track lock Unlock:
Instructions for use Vector & Vector BSA 17 of 48 2020-09-01 3.3 Handling seat and back Check the secure fit of the back after each change. In the case of angle adjustable backs or (seating unit) tilt mechanisms, it is essential to ac- tivate the anti-tipper from a setting of > 90°. The head must be supported (e.g. by a headrest) during back angle-adjustment or tilting. Only activate the (seating unit) tilt mechanism or angle adjustment with the brakes a

18 of 48

Instructions for use Vector & Vector BSA 2020-09-01 Unlock: (1) (2a) 90° (3) 3.3 Handling seat and back (1) Lock: (2) 1. 2. 90° 1. 2. 3.3.3 Firm curved back plate (3a) (3b) (2b) 4x 4x 4x 4x
Instructions for use Vector & Vector BSA 19 of 48 2020-09-01 3.3 Handling seat and back (2) (1) (2) (3a) Shift: (3b) 1. 2. (1) 1. 2. 3. 3.3.4 Back with raster The anti-tipper must always be activated before a new back angle position is used. Fold down (straighten: proceed accordingly in reverse order):

SORG Wheelchair Owners Instructions: