Sonoro AU-1300 Manual 

Text of the manual

Never attempt to repair it yourself

2 The CD player 3 Cleaning and care of your cubo cd-radio 3 Controls 4 Operation 6 Standby/switching on/switching off 6 Connecting headphones 6 Connecting an audio device 6 Connecting the antenna 6 Setting the time 7 Selecting 12- or 24-hours time display 7 Setting display screen brightness

Place the cubo design cd-radio on a fi rm, level surface.

Make sure that the cd-radio is not covered, so as to ensure there is always an adequate circulation of air; there are no direct sources of heat (e.g. radiators) radiating onto the product; the cd-radio is not subjected to direct sunlight; contact with moisture, water or spray i

Tuning station search +/-

2 CD slot 3 Mode operating mode 4 Menu settings 5 Skip Reverse 6 Pause CD pause 7 Play CD playback Controls 8 Stop CD playback stop 9 Skip Forward 10 Open eject CD 11 Power switch cd-radio into standby mode 12 Volume volume control +/- 1 2 3 4 5 6 7 8 9 10 11 12 16 17 18 For radio mode 13, 14, 15 Preset radio station buttons

The cd-radio must be plugged into an easily-accessible socket (230 V ~ 50 Hz).

Standby/switching on/switching off The device in now in standby operation. The time display lights up. To switch cubo on and off, use the Power button. Connecting headphones Headphones may be connected to the device. Connect the headphones to the connector at the rea

The battery has a plastic cover when you purchase the unit. Remove the piece of plastic to

activate the backup battery. Note: If no backup battery is inserted you will have to set the clock and alarm times after the power supply has been interrupted. Where the power supply is seldom interrupted, the life of the battery will depend t

Storing and calling up stations

Find your desired station. Hold one of the station buttons over the loudspeaker pressed until you hear a short “beep“. The station is now stored at this position. To call up the station again, you only need to press the corresponding station button. Adjusting tone (bass/treble) Press the Menu button. Press Skip until

While playing back, press the Menu button twice.

Select Shuffl e with the Skip Forward button. Confi rm the input with Menu. All titles will now be played back in random order. To stop the function, press Menu twice and then press Skip Forward, as often as neces- sary until the display at the lower edge of the screen goes out. Finall

Power supply: 230V ~ 50 Hz

AUX input: 3.5mm latched plug CD player: Laser class 1 Subject to technical modifi cations. Customer service For information and questions, please ring the number on the back of this Instruction Manual. � Your cubo design cd-radio is protected against transport damage by adequa

The following applies when making a claim under this guarantee, this does not affect your

statutory rights: Claims under guarantee can only be made within a maximum of 2 years from date of purchase. Within this period of guarantee we reserve the right to repair or replace the device free of charge in the event of material or manufactur

Other CD Player Manuals