Solvimus MBUS-REP Operation & User’s Manual
Read Online
Read the Solvimus MBUS-REP Operation & User’s Manual online using the built-in PDF viewer.
Key Pages of Document
solvimus GmbH – Ratsteichstr. 5 – 98693 Ilmenau – Germany Phone: +49 3677 7613060 – Fax: +49 3677 7613069 – Email: [email protected] ...we solve. www.solvimus.de MBUS-REP REPEATER FOR THE M-BUS Version 1.2 Date: 2019-05-21 Author: Sven Ladegast solvimus GmbH Ratsteichstr. 5 98693 Ilmenau Germany ...
Page 2/11 Version 1.2 Sven Ladegast, 2019-05-21 MBUS_REP500_UG_1.2_EN.docx Released © solvimus GmbH This page is left blank intentionally. ...
Sven Ladegast, 2019-05-21 Version 1.2 Page 3/11 © solvimus GmbH Released MBUS_REP500_UG_1.2_EN.docx Contents 1 General hints and conventions .................................................................................................................................... 4 1.1 About this document ........................................................................................................................................ ...
Page 4/11 Version 1.2 Sven Ladegast, 2019-05-21 MBUS_REP500_UG_1.2_EN.docx Released © solvimus GmbH 1 General hints and conventions 1.1 About this document This manual provides guidance and procedures for a fast and efficient installation and start-up of the units described in this manual. It is imperative to read and carefully follow the safety guidelines. 1.2 Legal bases 1.2.1 Copyright This manual, including all figures and illu ...
Sven Ladegast, 2019-05-21 Version 1.2 Page 5/11 © solvimus GmbH Released MBUS_REP500_UG_1.2_EN.docx Additional information: References to additional literature, manuals, data sheets and internet pages. 1.4 Font conventions Names of paths and data files are marked in italic-type. According to the system, Slashes or Backslashes are used. i.e.: D:\Data\ Menu items are marked in italic-type, bold letters. i.e.: Save Sub-menu items or n ...
Page 6/11 Version 1.2 Sven Ladegast, 2019-05-21 MBUS_REP500_UG_1.2_EN.docx Released © solvimus GmbH Components, especially OEM modules, are designed for the mounting into electronic housings. Those devices shall not be touched when powered or while in actual operation. The valid standards and guidelines applicable for the installation of switch cabinets shall be adhered to. The devices are equipped with electronic components that ...
Sven Ladegast, 2019-05-21 Version 1.2 Page 7/11 © solvimus GmbH Released MBUS_REP500_UG_1.2_EN.docx 2 General Information The M-Bus (Meter-Bus) is an established and well known interface for automated meter reading. Especially the ease of installation (simple two-wire system with powering by the bus) and the robustness are important features. These are also special attributes that are of interest for use in industrial environments. ...
Page 8/11 Version 1.2 Sven Ladegast, 2019-05-21 MBUS_REP500_UG_1.2_EN.docx Released © solvimus GmbH 2.2 Connectors The interface and connectors of the MBUS-REP are available on different sides of the device. The following figure shows the device: Figure 1: MBUS-REP500 The MBUS-REP is equipped with the following connectors: Connector Marking Pinning Remark Power supply 24VDC, 0VDC 24VDC: 12 - 36 VDC 0VDC: Reference ground Screw clamp ...
Sven Ladegast, 2019-05-21 Version 1.2 Page 9/11 © solvimus GmbH Released MBUS_REP500_UG_1.2_EN.docx 3 Bringing into service De-energize the M-Bus or whose master respectively before connecting the device. Please connect the slave connectors (MBI1 and MBI2, see section 2.2) of the MBUS-REP exclusively to the bus segment of the M-Bus that is powered by the original M-Bus master. Not doing so will damage the device. The MBUS-REP is c ...
Page 10/11 Version 1.2 Sven Ladegast, 2019-05-21 MBUS_REP500_UG_1.2_EN.docx Released © solvimus GmbH 4 Troubleshooting In case the MBUS-REP works not as described in this document, it is useful to locate the malfunction in order to resolve the issue and to recover the full functionality again. 4.1 Hardware error 4.1.1 The devices does not respond After powering the device it does not operate. Current consumption is about 0 mA. Pleas ...
Sven Ladegast, 2019-05-21 Version 1.2 Page 11/11 © solvimus GmbH Released MBUS_REP500_UG_1.2_EN.docx 5 Technical data 5.1 General characteristics 5.1.1 Physical dimensions / weight The housing has the following dimensions: • Width: 53 mm (3U) • Height: 89 mm • Depth: 61 mm • Weight: approx. 160 g 5.1.2 Installation / Storage The device is intended for installation in a switch cabinet: • Storage temperature: -20 – 70 °C ...
