Socket & See EPF 30 Instruction Manual & Specification
Text of Socket & See EPF 30 Instruction Manual & Specification
1.1 Equipment Markings
1.2 Operational Safety
The Socket and See EPF30 is designed to be used by skilled persons in
accordance with safe methods of work. If the EPF30 is used in a manner not
specified by Socket and See, the protection provided by it may be impaired.
Inspect the EPF30 before using. If any damage is visible such as cracks in the
casing the unit should not be used.
The intermittent beep and flashing red LED indicate that
During use, your hand must be behind the instrument safety barrier. Ensure the
instrument is gripped firmly.
To maintain safety, check the correct operation of the EPF30 both before and
after use, with a true AC output proving unit such as the Socket and See SP400
or a known live source.
The EPF30 has been designed to be used with PPE including insulated gloves if
required.
Never attempt to use the instrument on any circuit where the voltage exc
● Meets international safety standard BS EN 61010-1:2010
● Voltage measurement range 50 – 400VAC
● Safe live phase detection
● Illuminated red LED plus a continuous audible warning indicates greater
than 50VAC is present
● Slow flashing red LED with single beep indicates EPF30 scanning
function is working correctly
● EPF30 is fully functioning even if wearing full PPE
● Robust construction with IP54 water and dust ingress rating
5. Maintenance and Service
If required, clean with a damp cloth and mild detergent. Do not use abrasives
or solvents.
There are no user-serviceable parts. Contact Socket and See for service and
technical assistance:
Socket and See
Century Road
High Carr Business Park
Newcastle
Staffordshire, UK
ST5 7UG
Tel: 01782 567096
Fax: 01782 567095
Email: [email protected]
Website: www.socketandsee.co.uk
Red LED
Flashes with an intermittent audible
110V, 230V or 400V mains supplies
Operating Voltage Range
50 - 300 VAC to Earth 50-60 Hz
Safety Compliance
BE EN 61010-1:2010
IP Rating
IP54
Operating Conditions
5 to 40°C at 85%
Power
1 x 9V 6F22 battery
Dimensions
225L x 50W x 35D (mm)
Weight
180g
Ordering Information
Item
Supplier Code
Socket and See EPF30
SOC/EPF30