SOARING MODELS Kite Assembly Instruction Manual

1 Kit components 1- Wing 2- Fuselage 3- Fin 4- Stabilizer 5- Rod tubes 6- Accessor ...

2 Recommended electronic components 1- Battery 1S 250-350 mAh 2- KST X-08H *2 + Dy ...

3 Mounting of control horns Cut the slots for the control horns and aileron rods w ...

4 File out control horns before gluing. Paste in control horns using epoxy. ...

5 T-peg installation Prepare t-peg for gluing using file Make a slot for peg using ...

6 Servos installation Clean pockets from foam Mark hole position on aileron’s ro ...

7 Soldering ailerons connector Make holes for wires in core from servos pockets to ...

8 If you don’t use servo frame add foam or balsa for total servos fixing If you ...

9 Fuselage assembling Make holes for wires and tubes Glue servos for tail with 26m ...

10 Lay extension into fuselage. Glue mount part to connector, keep movable parts f ...