SMC Networks EX245-FPS1 Operation Manual

EX245-FPS1 EX245-FPS2 EX245-FPS3 PRODUCT NAME Digital Input Module MODEL / Series EX245-DX1 PRODUCT NAME Digital Output Module MODEL / Series EX245-DY1 ...

No.EX##-OMY0004 IMPORTANT This manual is only valid for the EX245-FPS1/2/3 with the following hardware and firmware versions.  Firmware version (FW) : 2.1.X  Hardware version (HW) : 03 and higher FW version details First digit: Safety firmware version Second digit: Watchdog version Third digit: PROFINET firmware version Refer to Section 24 Appen ...

No.EX##-OMY0004 Contents IMPORTANT ................................................................................................ 1 Contents ...................................................................................................... 2 1. Safety Instructions ................................................................................... ...

No.EX##-OMY0004 10.11. DIP Switches .............................................................................................................................. 65 10.12. Block diagram ............................................................................................................................ 68 11. Digital Input Module - EX245-DX1 .. ...

No.EX##-OMY0004 1. Safety Instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate the level of potential hazard with the labels of "Caution", "Warning" or "Danger". They are all important notes for safety and must be followed in addition to International Standards (ISO/IEC ...

No.EX##-OMY0004 1. Safety Instructions Caution 1.The product is provided for use in manufacturing industries. The product herein described is basically provided for peaceful use in manufacturing industries. If considering using the product in other industries, consult SMC beforehand and exchange specifications or a contract if necessary. If anything is ...

No.EX##-OMY0004 Operator This operation manual has been written for those who have knowledge of machinery and apparatus that use pneumatic equipment and have full knowledge of assembly, operation and maintenance of such equipment. Please read this operation manual carefully and understand it before assembling, operating or providing maintenance t ...

No.EX##-OMY0004 ■NOTE ○Follow the instructions given below when designing, selecting and handling the product. The instructions on design and selection (installation, wiring, environment, adjustment, operation, maintenance, etc.) described below must also be followed. Product specifications Use the specified voltage. Otherwise failure or m ...

No.EX##-OMY0004 Environment Select the proper type of protection according to the environment of operation. IP65 protection is achieved when the following conditions are met. (1) Connectors that are not used must be closed with covering caps. (2) All covering caps must be screwed down correctly after wiring and setting has been completed. (3) App ...

No.EX##-OMY0004 Maintenance Turn off the power supply, stop the supplied air, exhaust the residual pressure and verify the release of air before performing maintenance. There is a risk of unexpected malfunction. Perform regular maintenance and inspections. There is a risk of unexpected malfunction. After maintenance is complete, perform app ...