PXM PX156 Operation & User’s Manual

1 Description...................................................................................................4 2 Safety conditions........................................................................................5 3 Connectors and control elements...........................................................7 4 Designation of displaye ...

11.3 0 – 10V control.......................................................................................................29 11.4 Monostable buttons control.................................................................................30 12 D ...

The device depending on the model allow to control four or two independent circuits of 600W or 1200W loads each. It has built-in interference suppression system, signal lights, fuses, DMX-512 control and 0 – 10V input. There are also external control keys available that work in acc ...

signals 0 – 10V or using external keys. 2 Safety conditions PX156 dimmer is powered directly from standard 230V grid, what can cause electric shock when safety rules are not observed. Therefore it is necessary to observe the following: 1. Installation, particularly power connection, should ...

all powered devices. 9. All repairs demanding casing opening should be made with cut off power supply. 10. The device should be strictly protected against water and other liquids. 11. All sudden shocks, particularly dropping, should be avoided. 12. Device with damaged (bent) casing ...

4 Designation of displayed messages No DMX signal: slow dimming of all outputs Minimal brightness of a particular channel show in percentage (%) Maximal brightness of a particular channel show in percentage (%) Limit – output voltage limitation in a range from 50 to 230V DMX address selected in a range from 1 – 509 Group ...

Programmable chaser (in addition – reaction to DMX signal loss) Characteristics, 6 different characteristics to choose from Scenes and chasers programming Exponential characteristics F01 – F04, numbers of the edited scenes XFade switching on / off (for scene smooth changing) Analog inp ...

External button control Control function executed with external button no. 1 Maximum brightness duration time for button control Temperature sensor fail – contact service for repair Analog mode – selecting this option in the main menu activates analog control mode (also in the noS mode) 5 Dimmer programming Aft ...

parameters, including individual DMX addressing. The same address may be set to more. Group parameters have a higher priority than individual parameters. This means that programming in the ALL mode, for example, the DMX address, cancels the previous settings for all channels. 3. Dim ...