Puhui T-961 Operation & User’s Manual

Http://www.tech168.cn 1/9 Mini SMT Reflow Oven Model: T-961 Taian Puhui Electric Technology Co., Ltd http://www.tech168.cn ...

Http://www.tech168.cn 2/9 Features: 1. This machine selects IR and hot air heating technology controlling, equipped with special design wind wheel, speed stability and uniform temperature, suit for uninterrupted soldering the LED and BGA components. 2. This machine is equipped with the crawler-type and six temperature zone heating systems, and each tempera ...

Http://www.tech168.cn 3/9 Technical parameters Model T-961 The heating zone quantity upper3/down3 The length of the heating zone 730mm The heating type IR and hot air heating The cooling zone quantity 1 Maximum width of PCB board 230mm The operation direction left→right Delivery options Net transmission ＋ chain transmission The speed of conveyer belt 0 ...

Http://www.tech168.cn 4/9 Operating Instructions 1. Enter into the setting interface when starts the machine.(temperature zones from left to right 1/upper 3/upper 5/upper , 2/down 4/down6/down；face the swift of machine，(temperature zones from left to right1/upper 3/upper 5/upper , 2/down 4/down6/down）. 2. Rotate Param button slowly to move the white ...

Http://www.tech168.cn 5/9 proper wave. 2. There are lot kinds of solder paste, every company chooses is also not identical. For these reasons, we design this product can set eight waves, each wave has three sections, each section of the heating time and temperature all can alter. You can reset the heating waves according to the solder required heating temp ...

Http://www.tech168.cn 6/9 wave has related to the PCB, the density and size of components. Generally lead-free welding temperature should be higher 40℃ than melting point. Temperature Area Set 1. Set the temperature and belt speed to initial value (usually the manufacturer supply when adjust) 2. To the cooling oven, should be preheated for 20-30 minutes. ...

Http://www.tech168.cn 7/9 1. Set up field. 1.1. Please do the work in the clean environment condition. 1.2. Do not put the machine near the electromagnetism interfering resource. 1.3. Do not put the oven exits and entrances face towards to the fan and the window. 2. Power supply Please use system 220V. Ensure the machine contacts the earth well and request ...

Http://www.tech168.cn 8/9 2. Check if the fan shaft sleeve is in good condition. 3. Check if the fan and the electro-motor rotate without abnormal noise. 4. Check if the fan works smoothly. 5. Check if there are no foreign matters in the air passage. 6. Check if the transmission net-belt is in good condition. 7. Check if the electrical chest and electrical ...

Http://www.tech168.cn 9/9 2) Driving rolls and Diamond bearing seat Toolkits list Name Model Number Solid wrench 24 1pc Allen wrench 2、3、4、5、6、8 1set Cross head screwdriver 75*5 1 Mesh belt 8 Jackscrew M4*10 2 pcs Fuse 10X38 20A 1pc Driving shaft Driving rolls Diamond bearing seat ...