Progressive FLT-20 Quick Start Manual

Text of Progressive FLT-20 Quick Start Manual

Insert M6 (C) to attach supporting plates (6)

to each column (2,3). Do not fully tighten until attaching desk frame to tabletop (see step 6). Use 5*5 wrench (A) to tighten screws (C). Install supporting beam on the column (2) (3), tighten screw (F)

Connect the switch cord to the DC

port Connect the motor cord to the M1 port 2 2 1 Secure supporting beam, install baffle and power adaptor Install the baffle (8) to the supporting beam (4) using screws (B), and then lock with 2.5*2.5 wrench (A). Insert Connect all cables to the adaptor (7) Tighten screws on supporting beam with wrench 4x4 (A) and supporting plate with wrench 5x5 (A) Tighten 4x4 2.5x2.5 A A 1 2 G 3 G

How to use Remote

LED screen Key button Up button, adjust the desk upwards Down button, adjust the desk downwards Position 1, user’s first stored height position Position 2, user’s second stored height position Position 3, user’s third stored height position Position 4, user’s fourth stored height position Operation Instruction Adjust Height : 1. Press the "▲" button, the desk rises, press and hold to continue raising

Progressive Indoor Furnishing Owners Instructions: