PROAIM VI-252-00 Assembly Manual

Text of PROAIM VI-252-00 Assembly Manual

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything that is listed below. All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright statutes or in writing by the Publisher. Airwave Vibrati

 Loosen Pole Clamps via knobs. Insert a pole

into clamps and tighten them properly.  Attach Isolator onto the nose bracket of Airwave Arm with help of bolts. Then tighten these bolts with allen key. Airwave Arm Setup NOTE: Nose Bracket can be adjusted on two levels, top and bottom, as shown in image. NOTE: Nose Plate can also be mounted in the opposite direction.  Loosen springs to decrease the weighing capacity & tighten them to increase the w

 With arm at levelled position or slightly

above the horizontal position, push down the front of arm. It moves 3 to 4 times before reaching normal position. NOTE: It is very important to check the movement of arm.  In order to smoothen Spring Tension evenly, turn the adjustment knob. If the arm is too soft and moves up & down many times, turn it towards direction of H (Hard). If the arm is rigid turn it towards the direction of S (Soft).  In ord

YOUR PROAIM AIRWAVE VIBRATION ISOLATOR ARM

ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us. Liabilit

PROAIM Camera Accessories Owners Instructions: