Witt HRP Series Quick Start Manual

Text of Witt HRP Series Quick Start Manual

Check the approved dimensions of the suction line.

Align the HRP 3232, 5050-90 and 8050-90 exactly vertically. Align the HRP 5040 to 10080 up to 40bar exactly horizontally. Connect the pump stress-free. Do not use the flange screws to align or stretch the piping. Connect the cables with a loop (see photos on the back). Safety devices The

Necessary suction line Ø

Required minimum flow Orifice for CO2 HRP DN inch 50 Hz 60 Hz HRP Frequency Part-No. 50 Hz 60 Hz m3/h gal/min m3/h gal/min 3232 50 Hz 4.419.020.104 3232 80 3 0,6 2.6 0,7 3.1 60 Hz 4.419.020.114 5040 100 5 1,2 5.3 1,5 6.6 5050 50 Hz 4.419.020.103 5050 125 5 3 13.2 3,5 15.4 60 Hz 4.419.020.113 8050 150 8 5 22 5,5 24 8050 50 Hz 4.419

TH. WITT Kältemaschinenfabrik GmbH

Lukasstraße 32 52070 Aachen +49 241 18208-0 | [email protected]

Witt Water Pump Owners Instructions: