Wiseup W63 Operation & User’s Manual

Text of the manual

Model Number: W63

I. Product Overview 1. Day of the Week 2. Light Button 3. AM/PM 4. Hour 5. Mode Button 6. Month 7. Alarm Clock Indicator 8. Pedometer Indicator 9. Start Button 10. Second 11. Reset Button 12. Minute 13. Date 14. Chronograph Indicator

II. Time Setup

2.1 In the time display mode, hold down the mode button till you see the digit for the hours format starts blinking, then press the start button or reset button to select the 12 or 24 hours format. 2.2 Press the mode button once, you will see the hour digit starts blinking, then press the start button or reset button to set the hour. 2.3 Press

2.4 Press the mode button once, you will see the year digit starts blinking, then press the start button or

reset button to set the year. 2.5 Press the mode button once, you will see the month digit starts blinking, then press the start button or reset button to set the month. 2.6 Press the mode button once, you will see the date digit starts blinking, then

3.1 In the time display mode, press the mode button twice to enter into the lap stopwatch mode.

3.2 Press the start button once to start time counting. 3.3 Press the reset button once to show the first lap read, the chronograph indicator starts blinking, the watch is still working for the second lap time counting. 3.4 Press the reset button on

3.5 Press the reset button once to show the 2nd lap read, the chronograph indicator starts blinking, the

watch is still working for the third lap time counting. 3.6 Repeat 3.4-3.5 to show more lap reads. 3.7 Press the start button once to stop the time counting 3.8 Press the reset button once to clear the records. 3.9 Press the mode button for 4 times to bac

Note: the time read display will be different from the beginning after 60 minutes continuously time

counting. IV. Alarm Clock Setup 4.1 In the time display mode, press the mode button for 3 times to enter into the alarm clock setup mode. 4.2 Hold down the mode button till you see the hour digit starts blinking, then press the start button or reset button to

4.3 Press the mode button once, you will see the minute digit starts blinking, then press the start button

or reset button to set the minute 4.4 Press the mode button once to save all the settings. 4.5 Press the start button to turn on or turn off the alarm clock. 4.6 Press the mode button for 3 times to back to the time display mode.

V. Physical Parameters Setup

5.1 In the time display mode, press the mode button for 5 times to enter into the body parameters setup mode. 5.2 Hold down the mode button till you see the digit starts blinking, then press the start button or reset button to select imperial or metric unit. 5.3 Press the mode button once, you will see the height digit starts bli

More Wiseup Watch Owners Instructions: