Tumbl Trak Boundex Assembly Instructions
Text of Tumbl Trak Boundex Assembly Instructions
A. (4) Foam covered support bars
B. (4) Upright legs with D2 knobs
C. (1) Yellow Lycra bed
D. (2) Small top layers of Lycra with
bungee corners
E.
(1) Blue Lycra skirt
F.
(1) Not pictured: Drawstring carrying bag
Parts List
A.
A.
B.
C.
D.
E.
Any questions or problems, please call Tumbl Trak at (800) 331-4362
Thank you for investing in the
Tumbl Trak Boundex. After
opening the boxes, please check
the parts list to make
STEP 1 – Lay the yellow Lycra bed out flat and locate the four openings at
each corner.
STEP 3 – It is easiest to begin attaching the first leg by laying it on the ground.
Make sure the D2 knobs are facing down. Attach the first leg by inserting the
support bar end into the coinciding leg side.
STEP 3 (A) — To insert the other bar, lift up the leg making sure the hole and D2
knob is aligned to successfully lock into place.
Step 1
Step 3
Step 3
Step 2
STEP 7— Once the Boundex frame is completely set up, lay one of the small layers of Lycra on top on the
yellow bed and align the bungees at the four corners.
STEP 8— Pull string through opening of the two support bars.
STEP 8 (A)— Stretch the string outward to go around both D2 knobs.
Any questions or problems, please call Tumbl Trak at (800) 331-4362
STEP 5— Insert the remaining upright legs into the D2 knobs at each
corner of the Boundex.
Step 5
STEP 10 — To add the Lycra skirt, place over
top and locate the 4 corners of skirt to align
with each end.
Step 10
STEP 11 — Stretch corners of Lycra skirt over the
knobs until the legs are covered.
Step 11
STEP 12— The Lycra skirt will cover each side of the
Boundex.
Step 12
STEP 9 — Repeat this process at each corner with the bungees. Place the second layer of
Lycra with bungees across the first layer and repeat process with attaching bungees at