D-Link DWL-7700AP Manual 

D-Link Systems, Inc. Table of Contents Table of Contents Table of Contents .............................................................................2 Package Contents ............................................................................3 Introduction .....................................................................................4 Features and Benefits ........................................................... ...

D-Link Systems, Inc. Package Contents Minimum System Requirements Note: Using a power supply with a different voltage than the one included with the DWL-7700AP will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.  Computers with Windows, Macintosh, or Linux-based operating systems with an installed Ethernet Adapter  Internet Explorer version 6.0 o ...

D-Link Systems, Inc. Introduction Introduction The DWL-7700AP covers a large operating distance, providing an 802.11a/g outdoor WLAN which enables users to access the Internet or an organization’s network. The D-Link AirPremierTM DWL-7700AP features a die-cast watertight housing and a built- in lightning protector to protect the access point from harsh environmental conditions, including extreme variance in temperature. It al ...

D-Link Systems, Inc. Features and Benefits  Ideal for Internet Hotspots - Provides outdoor users with wireless Internet access.    Features and Benefits Robust Outdoor Housing - Designed for harsh outdoor environments, with die-cast, watertight housing, built-in heater and temperature sensor. 4 Different Operation modes with WDS (Wireless Distribution System) - Capable of operating in one of four different operati ...

D-Link Systems, Inc. Using the Configuration Menu Using the Configuration Menu To configure the DWL-7700AP, use a computer which is connected to the DWL-7700AP with an Ethernet cable (see the Network Layout diagram). First, disable the Access the Internet using a proxy server function. To disable this function, go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the enable box. Start your web brow ...

D-Link Systems, Inc. Using the Configuration Menu The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard. These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change. Home > Wizard ...

D-Link Systems, Inc. Using the Configuration Menu Home > Wireless > 802.11a Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable or Disable SSID broadcast. Enabling this feature broadcasts the SSID across th ...

D-Link Systems, Inc. Using the Configuration Menu Home > Wireless > 802.11g Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN). The SSID’s factory default setting is default. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. Enable or Disable SSID broadcast. Enabling this feature broadcasts the SSID across t ...

D-Link Systems, Inc. Home > LAN > Static Static (Manual) is chosen here. Choose this option if you do not have a DHCP server in your network, or if you wish to assign a static IP address to the DWL-7700AP. The default IP address is 192.168.0.50. Assign a static IP address that is within the IP address range of your network. Enter the subnet mask. All devices in the network must share the same subnet mask.. Enter the IP address ...

D-Link Systems, Inc. Get IP From: IP Address: Subnet Mask: Default Gateway: Home > LAN > DHCP Using the Configuration Menu Dynamic (DHCP) is chosen here. Choose Dynamic IP Address to obtain an IP Address automatically from a DHCP server in your network. This field is unavailable when DHCP is chosen. This field is unavailable when DHCP is chosen. This field is unavailable when DHCP is chosen. ...

D-Link Systems, Inc. Using the Configuration Menu Wireless Band: Choose IEEE802.11a or IEEE802.11g. IEEE802.11a is chosen here. Access Point: PtP Bridge: PtMP Bridge: AP Client: Access Point is the default setting. This mode is used to create a wireless LAN. PtP Bridge will allow you to connect two LANs together. The wireless bridge mode will work only with another DWL-7700AP. Click to enable and enter the MAC address of the ...

D-Link Systems, Inc. Using the Configuration Menu Advanced > Performance Wireless Band: Turbo Setting: Frequency: Channel: Data Rate: Beacon Interval: Select IEEE802.11a or IEEE802.11g. IEEE802.11a is selected here. This function is not available in IEEE802.11g. The frequency reflects the choice of the wireless band. When IEEE802.11a is chosen the frequency is 5.26GHz for channel 52. When IEEE802.11g is chosen the frequency ...

D-Link Systems, Inc. Using the Configuration Menu DTIM: Fragment Length: RTS Length: Transmit Power: (Delivery Traffic Indication Message) - Select a setting between 1and 255. 1 is the default setting. DTIM is a countdown informing clients of the next window for listening to broadcast and multicast The fragmentation threshold, which is specified in bytes, determines whether packets will be fragmented. Packets exceeding the ...

D-Link Systems, Inc. Using the Configuration Menu Wireless Band: Access Control: MAC Address: MAC Address List: Select IEEE802.11a or IEEE802.11g. IEEE802.11a is chosen here. Enter the MAC addresses that you wish to include in your filters list, and click Save. When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from the list. Advanced > Filters > Wireless Access Setti ...

D-Link Systems, Inc. Using the Configuration Menu Advanced > Filters > WLAN Partition Wireless Band: Internal Station Connection: Ethernet to WLAN Access: Internal Station Connection Between 802.11a & 802.11g: Select IEEE802.11a or IEEE802.11g. IEEE802.11a is selected here. Enabling this feature allows wireless clients to communicate with each other. If this is disabled, wireless stations of the selected band are not allowed ...

D-Link Systems, Inc. The DWL-7700AP has the newest, strongest and most advanced security features available today. When used with other 802.11 WPA (Wi-Fi Protected Access) compatible products in a network with a RADIUS server, the security features include: WPA & 802.1x represent the first line of defense against network intrusion. In the authentication process the RADIUS server verifies the identity of the client attemptin ...

D-Link Systems, Inc. Using the Configuration Menu Advanced > Encryption > Open System Wireless Band: Authentication: Ethernet to WLAN Select IEEE802.11a or IEEE802.11g. IEEE802.11a is selected here. Select Open System to communicate the key across the network. Encryption: Key Type: Select Enabled or Disabled. When Enabled is selected, as it is here, please fill in the following fields. Select HEX (Hexadecimal digits consist ...