Posey 8358 Quick Start Manual
Text of Posey 8358 Quick Start Manual
Before using this sensor, read this entire
instruction sheet and save for future reference.
Posey® Self-Releasing Chair Belt Sensors are designed to provide the
earliest possible warning that a patient is at immediate risk of falling.
Monitoring starts as soon the belt is fastened; the alarm activates the
instant the belt is unfastened, before the patient can exit the chair.
Belts adjust from 21” to 44” (53 cm to 112 cm). Hook-and-Loop Belt,
Long, adj
For Model 8358, 8371 and 8372:
1. Draw strap ends down under chair seat at
a 45˚ angle (fig. 3).
2. Choose a site to attach straps at a juncture
of the frame behind and under the seat,
out of the patient’s reach. Make sure straps
cannot slide in any direction, or change
angle or position (fig. 4).
3. Wrap each strap around its attachment point. Thread tail of each
strap through both metal rings, then back over one ring and through
the other metal rin