Siemens SIMATIC RF300 System Manual

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices s ...

1 ............................................................................................................................................................... 5 1.1 SIMATIC RF360R................................................................................................................... 5 1.1.1 Features ........................... ...

(status display of the reader and PROFINET con‐ nection) ② Operation LEDs (operating states of the reader) ③ Interface for the power supply X80 (M12, 4-pin, L-coded) ④ Interface for PROFINET IO X1 P1R (M12, 4-pin, D-coded) ⑤ Interfa ...

You need to connect the reader to functional ground. A ground bore hole is provided for this on the connection side of the reader for attaching a grounding conductor. Required tools You need the following tools to connect to the functional ground: • Screwdriver • Stripping tool • Crimp tool Accessories r ...

1.1.4 Connecting readers Requirement Only wire the communication module when the supply voltage is switched off. Required tools When using preassembled cables, you need the following tool: • Torque wrench set (e.g. from Peres; M12/M8, can be set; PER091) for wiring the reader connections Note Using preassembled ...

• For connecting the power supply M12 plug (4-pin, L-coded) and 4-wire cable (4 x 1.5 mm2) • for PROFINET IO connection M12 plug (4-pin, D-coded) and 4-wire Ethernet cable (Twisted Pair, shielded) You can find the associated article numbers in the section "AUTOHOTSPOT". Connect the plug Proceed as ...

Pin Assignment View of M12 socket, 4-pin 1 Data line TxP 2 Data line RxP 3 Data line TxN 4 Data line RxN 1.1.6 LED displays Operation LED display The operational states of the reader are displayed by two LEDs. The LEDs can adopt the colors white green, red, yellow or blue and the states off , ...

The operating states of the reader are displayed by the LEDs "R/S", "ER" and "MAINT". The LEDs can adopt the colors green, red or yellow and the statuses off , on , flashing : Table 1-5 Shows the operating states via the status LED display R/S ER MAINT Meaning The reader is turned off. • LED test while ...