PolyVision Nota Installation And Maintenance Manual

• Phillips Head Screwdriver • Small hammer or mallet • Drill bit – 15/64” (6 mm) for plaster/drywall and concrete or 3/32” (2.4 mm) for wood surface • Small level • Measuring tape Hardware Included: • Installation template • Stand-off mounts • Screws and anchors • Allen wrench Two people recommended for installation. ...

Step 4 Determine if the Nota board will be mounted to wood, plaster/drywall or concrete. For wood surface: Secure the screw directly into the wood, plastic wall anchor is not recommended. Plaster/drywall or concrete surface: Plastic wall anchor is recommended. Drill a pilot hole 1” deep at each crosshair. Supplied anchor and screw will be placed in this pilot hole. For wood surface, ...

drilled pilot hole for wood application, or the plastic wall anchor for plaster/drywall or concrete. Tighten the screw until the stand-off base is securely fastened to the wall. Place top mounts with adjustment screw facing upward. Place bottom mounts with adjustment screw facing downward. Place the slider/cap into the mounted stand-off base for the bottom mounts. Tighte ...

• Moisten a clean cloth or paper towel with any glass cleaner (like Windex) or high-quality whiteboard cleaner. • Wipe the board to remove any residue. • Dry surface with a clean cloth. Regular Cleaning + Maintenance If you use your board daily, we recommend cleaning it once a week. If you use it less often, clean it once a month for the best results. • Erase all content. • Moisten a clean cloth or paper towel with any glass cl ...

one of the most durable personal whiteboards on the market. The long-lasting surface won’t scratch or ghost and no matter how many times you clean your board, the surface won’t wear over time. It is also smooth and non-porous in nature making it resistant to bacteria. Not only is it durable, but the Calendar and Dot Grids are printed onto the surface with ceramic ink, so it w ...