Playcraft 1702 Manual 

Text of Playcraft 1702 Manual 

IMPORTANT NOTES: Read First

For Customer Service Call 800.333.8519 (U.S.A.) or 541.955.9199 (International) Manufactured by Krauss Craft, Inc. www.playcraftsystems.com DOUBLE SLIDE 1702 Page 1 of 7 Rev E 7/18/2009 (A) Use liquid thread lock (such as Loctite ®) with all threaded hardware. Important: Liquid thread lock (prior to curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a lubricant during ass

For Customer Service Call

800.333.8519 (U.S.A.) or 541.955.9199 (International) Manufactured by Krauss Craft, Inc. www.playcraftsystems.com DOUBLE SLIDE 1702 Page 2 of 7 Rev E 7/18/2009 Footing Detail (Finish Grade) (Top of Soil) (Top of Soil) Step 1 Refer to corresponding Footing Layout and mark footing hole locations. Dig (2) Ø 12" and (1) 12" x 24" footing hole(s). Refer to Footing Detail for depth and details. Note: For 36" Double Slide dig only (2) �
For Customer Service Call 800.333.8519 (U.S.A.) or 541.955.9199 (International) Manufactured by Krauss Craft, Inc. www.playcraftsystems.com DOUBLE SLIDE 1702 Page 3 of 7 Rev E 7/18/2009 9 3 16" 233mm 93 16" 233mm 185 16" 466mm 575 16" 1456mm 93 16" 233mm 93 16" 233mm R5 Top View - Footing Layouts 36" Double Slide 48" Double Slide 60" Double Slide 72" Double Slide 407 16" 1027mm 9915 16" 2538mm 185 16" 466mm 46" 1168mm 1013 16" 2570mm 185 16" 466mm 3413 16"
For Customer Service Call 800.333.8519 (U.S.A.) or 541.955.9199 (International) Manufactured by Krauss Craft, Inc. www.playcraftsystems.com DOUBLE SLIDE 1702 Page 4 of 7 Rev E 7/18/2009 18 5 16" 466mm 93 16" 233mm 4115 16" 1065mm 1017 16" 2577mm 9 3 16" 233mm 471 2" 1207mm 10211 16" 2609mm 93 16" 233mm 5813 16" 1494mm 185 16" 466mm 93 16" 233mm R3.5 Top View - Footing Layouts 36" Double Slide 48" Double Slide 60" Double Slide 72" Double Slide 365 16" 922mm
For Customer Service Call 800.333.8519 (U.S.A.) or 541.955.9199 (International) Manufactured by Krauss Craft, Inc. www.playcraftsystems.com DOUBLE SLIDE 1702 Page 5 of 7 Rev E 7/18/2009 Figure 1.3 Step 2 Attach Double Slide Leg to the base of the double slide as shown in Figure 1.1. (See Note A) Step 3 Note: This step does not apply to the 36" Double Slide. Attach slide supports to the double slide as shown in Figure 1.2. (See Note A) Step 4 For R5 Double

Manufactured by Krauss Craft, Inc.

www.playcraftsystems.com For Customer Service Call 800.333.8519 (U.S.A.) or 541.955.9199 (International) DOUBLE SLIDE Rev E 7/18/2009 1702 Page 6 of 7 DOUBLE SLIDE SPACER: Shall be fabricated using punched and formed 12 gauge sheet Steel. The Double Slide Spacer shall be Play-Tuff™ coated after fabrication. DOUBLE SLIDE: Shall be constructed of UV-stabilized, rotationally molded linear low density polyethylene with an a
Manufactured by Krauss Craft, Inc. www.playcraftsystems.com For Customer Service Call 800.333.8519 (U.S.A.) or 541.955.9199 (International) DOUBLE SLIDE 1702 Page 7 of 7 Rev E 7/18/2009 Periodically tighten all screws, bolts and nuts. A periodic inspection of all parts is necessary. If a part is broken or worn, replace immediately. For general maintenance please refer to our Playground Maintenance Manual. Maintenance 60" Double Slide 72" Double Slide R5 Pa

Playcraft Play Sets & Playground Equipment Owners Instructions: