WEISS ROBOTICS GRIPLINK-ET4 Quick Start

Text of the manual

This quick start guide describes the first steps with the servo-electric gripping

modules of the CR PLUS series. It does not replace the official operating manual of the GRIPLINK-ET4! The complete operating manual can be found at www.griplink.de. Target audience The assembly, initial commissioning, maintenance and repair of the gripping module

Connect the GRIPLINK interface converter to a local network or directly to

the network interface of your computer and open the web interface by ty- ping the IP address of the GRIPLINK interface converter into the address bar of your web browser. In the delivery state, the web interface can be accessed at http://192.168.1.40. Ethernet 24 V GRIPL

M8 plug PWR IN 24 V/ 6 A

X2 M8 plug PWR OUT 24 V/ 6 A X3 M12 socket Tool Port X4 M12 socket Tool Port X5 M12 socket Tool Port X6 M12 socket Tool Port X7 M8 socket Ethernet X8 M8 socket Ethernet 1-4 State-LEDs Pin Signal Function 1 +UB Power supply +24 V 2 +UB Power supply +24 V 3 GND Power supply 0 V 4 GND Power supply 0 V Pin

More WEISS ROBOTICS Robotics Owners Instructions: