Sesamo DUALCORE LH100 Installation Manual

recommends you read and follow the installation and usage instructions in this manual carefully. This automated system must only be installed by professional technicians, for whom this manual is intended. Improper installation can present a ha ...

machines directive ........................................................................................................... 4 technical specifications - intended use ................................ ...

accordance with directive 2006/42/CE and must: - Provide the Technical File with the documents indicated in appendix VII of the Machines Directive and save them for at least 10 years. - Edit the CE declaration of conformi ...

RATED POWER LH100 = 150 W LH140/RD100 = 180 W EXTERNAL DEVICES POWER 15Vdc - 12W MAX BATTERY BACKUP POWER LH100/LH140 = 24V 1,3Ah RD100 = 24V 2Ah OPENING SPEED 1 Leaf = 70cm/s 2 Leafs = 140 cm/s PASSAGEWAY 1 Leaf LH100/LH140 = 700 ÷ 3000 mm 1 Leaf RD100 = 800÷ 300 ...

3) Keep the instructions for future reference. 4) This product was designed and built exclusively for the use indicated in this manual. Any other use not expressly indicated could compromise the integrity of the product and/or represent a source of hazard. 5) SESAMO ...

The automated device is designed to work with different accessory and peripheral devices configurations. Fig.4 shows an example of a complete installation where possible access points are highlighted in the automated device box for connecting the following peripheral devices: A. Left side opening safety sensor ...

of the following parts (ref. Fig. 5/A): Q- emergency battery R- Master gearmotor with encoder - type 63x55 S- Master control unit T- bistable electro lock (optional) U- Slave control unit V- Slave gearmotor with encoder - type 63x55, including belt te ...

compromise the stability of the fixture, causing it to detach from the wall and parts to fall. It is important to perform a careful assessment of the support structure, the hold of the screws or washers and to stop the installation and perform further as ...

maximum capacity of the automated system; in case of doubt, do not proceed beyond the installation phase; if leaves with weights near to the capacity limits are installed, more frequent maintenance intervals and periodical checks to assess ...