Toshiba e-STUDIO2010AC Imaging Manual

• The official name of Windows® 8.1 is Microsoft Windows 8.1 Operating System. • The official name of Windows® 10 is Microsoft Windows 10 Operating System. • The official name of Windows Server® 2008 is Microsoft Windows Server 2008 Operating System. • The official name of Windows Server® 2012 is Microsoft Windows Server 2012 Operating System. • The offic ...

The installation and service shall be done by a qualified service technician. 1. Transportation/Installation - When transporting/installing the equipment, employ two or more persons and be sure to hold the positions as shown in the figure. The equipment is quite heavy and weighs approximately 78.1 kg (172.2 lb.), therefore pay full attention when handling it. - Be sure not to hold the movable parts or units (e.g. t ...

MFP as possible. 2. General Precautions at Service - Be sure to turn the power OFF and unplug the power cable during service (except for the service should be done with the power turned ON). - After the power cable is disconnected, an electric charge may remain in the boards of the equipment. Therefore, be sure to disconnect or connect the connectors when abo ...

accidents such as burnout. Do not allow a short-circuit and do not use the parts not recommended by Toshiba TEC Corporation. 5. Cautionary Labels - During servicing, be sure to check the rating plate and cautionary labels to see if there is any dirt on their surface and if they are properly stuck to the equipment. 6. Disposal of the Equipment, Supplies, Packing ...

The Imaging Manual is intended for customers using the Toshiba e-STUDIO2010AC/2510AC/2515AC/ 3015AC/3515AC/4515AC/5015AC with a variety of specific needs and inquiries for high image quality, such as: • How to obtain a clearer copy image • How to maintain the current image quality • How to make the text look sharper on the copy The Toshiba MFPs are factory-configured to provide image quality settings that satisfy the maj ...

Icons The following icons used in this manual denote the following: : • Copy——— An adjustment having an effect on copying in the Black mode (excluding the Image Smoothing mode) • Printer——–An adjustment having an effect on Black and White mode printing * The adjustment will be effective, if “Black and White” is selected from among the “Color” options on the Windows printer driver or if “Mono” is sel ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC i Table of Contents 1. General Adjustments – Copying, Printing and e-Filing (Output from Box) 1.1 To Obtain a Darker Image.............................................................................................1-1 1.2 To Adjust the Density on a Solid Colored Image...........................................................1-7 1.3 To Achieve th ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved ii 2.24 To Reduce Streaks at Scanning with DF.....................................................................2-95 2.24.1 When adjusting the image quality of the Black mode............................................ 2-96 2.24.2 When adjusting the image quality of the Full color mode...................................... 2-97 ...

© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC iii 3.10 To Prevent Dark Toner from Coming Off.....................................................................3-87 3.11 To Register the Image Quality Adjusted Corresponding to a Preference (To use the Custom Color Settings) ............................................................................3-88 3.12 To Print a Full-C ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved iv ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC 1-1 1. General Adjustments – Copying, Printing and e-Filing (Output from Box) 1.1 To Obtain a Darker Image Explanation When an original containing photo images or gradational images is printed, the output image sometimes looks light and blurred. Perform image quality control or automatic calibration, and adjust the transfer roller bias output, ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved 1-2 To adjust the copy image quality Use steps (a) through (i) to perform automatic calibration. (a) Press [User Functions -User-] on [Home] screen to enter the “User Functions” menu. (b) Press [Admin]. (c) Enter the 6 to 64 digit administrator password. Press [OK]. (d) ...

© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC 1-3 • Image quality adjustment for 1200 dpi high-resolution printing Press [1200 dpi Print] in step (f), in the same way as image adjustment for 600 dpi full-color printing noted above. After performing automatic calibration, print and check the image quality. If further i ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved 1-4 (2) Select [05 ADJUSTMENT MODE]. Change the values for codes [2934 to 2937] to adjust the transfer (2nd transfer) roller bias output. (Adjust the offset voltage of transfer roller bias so as to increase the density of the image.) The code to use varies depending on the p ...

© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC 1-5 • Front” refers to the printed side in the simplex mode or the side that is delivered facing upwards in the duplex mode. “Back” refers to the printed side that is delivered facing downwards in the duplex mode. • The table below shows you the acceptable paper we ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved 1-6 After adjusting the density, print and check the image quality. If further image quality adjustments are still necessary, perform the next procedure. (3) Check the life of the consumables (particularly the drum and fuser unit) and replace them, if necessary. • When rep ...

© 2018 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC 1-7 1.2 To Adjust the Density on a Solid Colored Image Explanation The density of a certain color can be made darker or lighter in accordance with the type of paper or the content of an original. When the toner amount on solid areas must be adjusted as requested by a user ...

e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved 1-8 It is recommended that the changing amount for one time falls within ± 20 bits. (b) Select [05 ADJUSTMENT MODE], select code [2742] and then press the [START] button. After performing image quality control, print the image and check its quality on the solid areas. (2) S ...