Verco Oblique Visual OVRT 0806 Assembly Instructions
Text of Verco Oblique Visual OVRT 0806 Assembly Instructions
Oblique Visual desking
OVRT 0806/1006/1206/1208/1408/1608/1808/2008/2408
OVWT 1208/1408/1608/1809/2009/2409
4+ unit back to back Oblique Visual
bench using the following tops:
2 x VRT
2 x VTBM/S/L
2 x OSR 24/20/18
(1.8 - 2.4m tops only)
1 x OLF 08 L
/OLF 06 L
1 x OILF 08
/OILF 06
1 x OLF 08 R
/OLF 06 R
4 mm Allen key
Equipment Required
(not included)
Fixings
Repeat steps 2 to 4 with the remaining
legs and beams. If your bench consists
of multiple desks just keep adding the
sections one by one. It is advisable to
build up the frame in this way so it is
in the desired position for the finished
bench as large benches can be difficult
to move.
Your assembled frame should look
like this (or with as many sections
as y
With the assistance of at least 1 other
person, gently lower the top into
position over the frame, resting it on the
spacers and the beam. Once the top is
in position, line up the outside leg more
accurately with the end of the desk
top taking care to avoid knocking the
spacers out of position.
Take the four plastic spacers supplied
with the legs (two with e
Repeat the previous 5 steps using the
remaining leg frame, or if your bench
consists of multiple tops, keep working
along its length in this way ensuring all
fixing bolts are securely tightened.
Your finished bench should resemble
the image on the left. Please refer
to further instructions for the fitting of
screens and accessories.
Using two 15mm bolts secu