Dual XIA2340 Installation & Owner's Manual
Text of the manual
XIA SERIES INSTALLATION
Preparation
Please read entire manual before installation. Due to the technical nature of
amplifiers, it is highly recommended that your DUAL amplifier is installed by a
professional installer or an authorized dealer.
Before You Start
• Disconnect negative battery terminal. (consult a qualified technician for instructions)
• Avo
Be sure to follow specific instructions included with your amplifier installation kit
(not included with this amplifier). The information below should be used a general
guideline only.
Power Wire (+12V)
• Disconnect negative battery terminal before proceeding. (consult a qualified
technician for instructions if you are unsure)
• Plan wire routing be
XIA SERIES INSTALLATION
Features and Control Locations
Low Level Inputs
High Level Inputs
Input Level Control
Crossover Frequency
Crossover Mode Switch
Bass Boost
1
2
3
4
5
6
LED Indicator
Power Connections
Main Fuse
illuminite Fuse
illuminite Outputs
Speaker Connections
7
8
9
10
11
12
8
9
12
1
2
3
10
11
4
5
6
7
XIA SERIES INSTALLATION
Fuse Rating
When replacing fuses, make sure new fuse
is the correct type and amperage. Using an
incorrect fuse could damage the amplifier.
XIA2340 30 amp & 2 amp ATO x 1 each
XIA2460 40 amp & 2 amp ATO x 1 each
Power/Ground Wire Size
For optimum performance, use only the wire
size listed below (minimum) or larger.
XIA2340 10 gauge
X
XIA SERIES INSTALLATION
Output Connections
The illuminite lighting elements of DUAL XiN series speakers provide you with a unique
custom touch to your vehicle. Dual’s patent pending illuminite bulb system and control
circuitry provides an extraordinary Blue-Hue illumination which allows great creative
opportunities for the beginner and seasoned custom in
XIA SERIES INSTALLATION
Amplifier Connections
Speaker Connections
Connect speaker wires observing
polarity. The minimum impedance
load for the XIA2340 and XIA2460
is 2 ohms (stereo) and 4 ohms
(bridged). Use of loads lower than
these is not recommended and
may cause amplifier damage.
The XIA2340 and XIA2460 can be
wired for stereo, bridged or
stereo/bridge
XIA SERIES OPERATION
Configuration/Setup
The input level control (gain) is used to obtain the best
possible match between the head unit audio output and the
amplifier input. Begin by turning the input level control fully
counter clockwise. Next, turn up the head unit volume
control around 3/4 of the way up. Adjust the input level
control clockwise until au