Seaside Casual DEX 140 Assembly Instructions

Text of the manual

DEX Collection 140, 141, 142, 143 Rev B Page 1

Seaside Casual Furniture | 11 Industrial Drive Coventry, RI 02816 | 800-809-3114 | [email protected] 1 PLEASE READ INSTRUCTIONS COMPLETELY BEFORE BEGINNING. Carefully remove contents from box. Make sure that all parts and hardware are included using the Parts List below. WARRANTY QUESTIONS OR COMMENTS

DEX Collection 140, 141, 142, 143 Rev B Page 2

Part Code: 4MMALLEN 4mm Allen Wrench x 1 Part Code: 316-8X3/4PPDS 3/4” Phillips Pan Head Screw x 10 Actual Size Actual Size Part Code: 316-8X1-3/4PFDS 1-3/4” Phillips Head Screw x 10 50mm Hex Lag Part Code: 316-1/4-10-50HL Actual Size 5/8” tap® x 10 Actual Size x 12 Part Code: 316-8X3/4PTS Parts

DEX Collection 140, 141, 142, 143 Rev B Page 3

Align Front and Rear Apron (Rear Apron has pocket for screw) as shown. Secure using *(6) 50mm Hex Lags thru counter- bored holes in Legs into pilot holes in Aprons. Secure Rear Apron using (2) 1- 3/4” Phillips Head Screws thru pockets into Rear Legs. Plug Holes with 5/8” taps®. *Substitute 80mm Lags fo

DEX Collection 140, 141, 142, 143 Rev B Page 4

Attach rear of Arm to Back Assembly using (1 per Arm) 50mm Hex Lag thru counter-bore hole in rear of Back Assembly into pilot hole in rear of Arm. Plug hole with 5/8” taps®. 5 ATTACH ARMS TO BACK (ARMED VERSIONS ONLY) Secure Seat Assembly using (8) 1-3/4” Phillips Head Screws thru counter-bores in Seat

DEX Collection 140, 141, 142, 143 Rev B Page 5

Insert fully assembled chair onto base as shown. 8 INSERT FULLY ASSEMBLED CHAIR ONTO BASE Attach Aluminum and Post to seat base through pre- drilled holes in aluminum using 70mm Hex Lags. En- sure proper alignment with holes before tightening. 7 ATTACH ALUMINUM AND POST TO SEAT BASE

Other Patio Furniture Manuals