Sealey PRK01 Instructions

Text of Sealey PRK01 Instructions

PIT RAMP KIT - 4 TONNE

MODEL NO: PRK01 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MA

Select a suitable hard and level surface upon which to use the ramp.

4.2. � Lay�out�the�required�blocks�and�interlink�them�as�shown�in�fig.5.�Ensure�full�engagement�of�interlocks. 4.3. Set each leg of ramp to line up with the other in length and to run parallel in width. 4.4. Set width between ramps to suit vehicle tyre track such that ramps are centered to tyre centre lines. Failure to do so may result in

Sealey Tools Owners Instructions: