Duerkopp Adler 841-27 Operating Instructions Manual
Text of the manual
Preface and General Safety Information
Part 1: Operating Instructions Class 841-27
1.
Product Description
1.1.
Proper Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
1.2
Short Description . . . . . . . . . . . . . . . . .
Cleaning and Inspection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6.2
Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4
The DÜRKOPP ADLER 841-27 is a sewing unit which can properly be
used for the sewing of light to medium weight material.
Such material is, as a rule, material made up of textile or synthetic
fibers. These materials are used in the garment industry. Generally,
only dry material may be worked with this sewing unit. The mat
The feed unit is prepared for connection to an in-house vacuum unit. A
vacuum distributor with filter is available as optional equipment. It
allows for the attachment of up to 3 sewing units to an in-house
vacuum unit.
If no in-house vacuum unit exists the rotary blower, which is available
as optional equipment, must be ordered. The vacuum pe
(slight ball point)
Needle thickness:
[Nm]
70 to 100, Standard 80
Yarns:
[Nm]
synthetic threads and synthetic threads
with cotton covering up to 65/2
Sewing stitch type:
301/Double saddle stitch
Number of stitches:
[min-1]
1000 to 4000
- at delivery
3500
Delivery with 841-E114/22
Number
For the operational readiness of the sewing unit the feed rail must be
run into the reference position once after switching on.
The reference position is required in order for the controls to receive a
defined base position for the feed rail.
Caution Risk of Injury !
Do not reach into the motion area of the feed rail 3 du
Operating the Sewing Machine Head
4.1
Threading the Needle Thread
Caution Risk of Injury !
Turn off the main switch 1 of the sewing machine head !
Thread the needle thread only with the machine head turned off.
–
Thread the needle thread as shown in the illustration.
1
9
Winding the Underthread
–
Place the yarn spool on the yarn stand.
–
Thread the underthread as shown in the illustration.
–
Place the bobbin on winder 1.
–
Wind the underthread clockwise approx. 5 times around the bobbin
core.
–
Swing winder lever 2 to the bobbin and let catch.
–
The bobbin is filled during sewing.
The bobbin can also be fille
Threading the bobbin
–
Insert a full bobbin into the bobbin case top, the bobbin must
thereby turn counterclockwise when the underthread is pulled off.
–
Guide the underthread through slot 6 under spring 7.
–
Depending on the desired buttonhole, the underthread must be
guided through slot 9 for a raised-form buttonhole (more thread is
pulled forward ov
Changing the Needle
Caution Risk of Injury !
Turn off the switch 1 of the sewing machine head.
Change the needle only with the sewing machine head turned off.
–
Loosen screw 1.
–
Remove the needle from the needle bar.
–
Push the new needle into the drilled hole of the needle bar up to
the stop.
–
Align the needle so that the furrow 3 lies on the