Dukane 220E Operation & User’s Manual

TABLE OF CONTENTS ......................................................................................... 1 COPYRIGHT INFORMATION ................................................................................2 CHAPTER 1 PRECAUTIONS ................................................................................3 CHAPTER 2 PACKAGE CONTENT ......................................................................4 CHAPTER 3 PRODUCT OVERVIEW ....................................................................5 3.1 PRODUCT INTRODUCTION.......................................................................5 3.2 I/O CONNECTION .......................................................................................6 3.3 DIP SWITCH ................................................................................................6 3.4 & 3.5 INFRARED REMOTE CONTROL ......................................................7 CHAPTER 4 HOW TO USE IT ...............................................................................9 4.1 GETTING STARTED ...................................................................................9 4.1.1 TURN ON THE DIGITAL PRESENTER...................................................9 4.1.2 LENS FOCUS ..........................................................................................9 4.1.3 ZOOM IN / OUT........................................................................................9 4.1.4 SWITCH SOURCE...................................................................................9 4.1.5 PHOTO/TEXT:........................................................................................ 10 4.1.6 ENTER AWB .......................................................................................... 10 4.1.7 CAPTURE IMAGE & REVIEW CAPTURE IMAGE............................... 10 4.2 SHOWING THE OSD MENU.....................................................................12 4.3 SELECT FUNCTION: ................................................................................12 4.4 OSD MENU INTRODUCTION...................................................................13 CHAPTER 5 USB SOFTWARE INSTRUCTIONS...............................................16 CHAPTER 6 TROUBLESHOOTING...................................... Inside Back Cover

Always follow these safety instructions when setting up and using the Digital Presenter: 1. Do not place the Digital Presenter on an unstable trolley, stand or table. 2. Do not use the Digital Presenter near water or source of heat. 3. Use attachments only as recommended. 4. Use the type of power source indicated on the Digital Presenter. If you are not sure of the type of power available, consult your dealer or local electricity company for advice. 5. Place the Digital Presenter where it can be easily unplugged. 6. Always take the following precautions when handling the plug. Failure to do so may result in sparks or fire. „ Ensure the plug is free of dust before inserting it into a socket. „ Ensure that the plug is inserted into the socket securely. 7. Do not overload wall sockets, extensions leads or multi-way plug boards as this may cause fire or electric shock. 8. Do not place the Digital Presenter where the cord can be stepped on as this may result in fraying or damage to the lead or the plug. 9. Unplug the projector form the wall socket before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners. 10. Do not block the slots and openings in the case. They provide ventilation and prevent the Digital Presenter from overheating. Do not place the Digital Presenter on a sofa, rug or other soft surface or in a built-in installation unless proper ventilation is provided. 11. Never push objects of any kind through slots. Never allow liquid of any kind to spill into the Digital Presenter. 12. Except as specifically instructed in this User’s Manual, do not attempt to operate this product by yourself. Opening or removing covers may expose you to dangerous voltages and other hazards. Refer all servicing to licensed service personnel. 13. Unplug the Digital Presenter during thunderstorms or if it is not going to be used for an extended period, do not place the Digital Presenter or remote control on top of heat-emitting equipment or heated objects such as a car and etc. 14. In the following situations, unplug the Digital Presenter from the wall outlet and refer servicing to licensed service personnel: „ If the power cable or plug becomes damaged or frayed. „ If liquid is spilled into it or the Digital Presenter has been exposed to rain or water.

Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. This Digital Presenter has a 2 wires AC line Plug. This is a safety feature to ensure that the plug will fit into the power outlet. Do not try to defeat this safety feature. If the Digital Presenter will not be used for an extended time, unplug it from the power outlet. Caution: To reduce the risk of electric shock. Do not remove cover (or back). No user-serviceable parts inside. Refer servicing to licensed service Personnel. This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in this User’s Manual with this unit. „ FCC Warning This Digital Presenter has been certified to comply with the limits for a Class A computing device, pursuant to Subpart J of Part 15 of FCC Rules. These limits are designed to provide reasonable protection against a harmful interference when the equipment is operated in a commercial environment. „ EN55022 (CE Radiation) Warning This product is intended for use in a commercial, industrial, or educational environment. It is not intended for residential use. CAUTION RISK OF ELECTRIC SHOCK This is a Class A product. In a domestic environment it may cause radio interference, in which case the user may be required to take adequate measures. The typical use is in a conference room, meeting room or auditorium.

Please make sure the package comes with the following items when you unpack: Camera 220C User’s Manual CD Power Cable USB Cable C-Video Cable VGA Cable DVI Adapter Remote Controller

3.1 Product Introduction Lamp DIP Switch Lens I/O Port Power / Control Button

SW1 SW2 SW3 SW4 Diagram Auto Exposure C-Video Output Video Signal Output Resolution ON AE ON Video ON PAL SVGA OFF AE OFF Video OFF NTSC XGA (Default Setting) IR Control Input IR Control Input 3.5 mm Mini

1. Power: Turn on/ off. 2. Capture: Capture the image. 3. Freeze: Freeze the image. 4. Arrows: You may press the 4 hot keys of Up/Down/Right/Left to go to the desired function item then press the Enter key to take effect. 5. Flip: Rotate the image by 180 degrees. 6. Source: Switch between different signal sources. 7. Gamma: Different color contrast modes. 8. Lamp: Turn on/ off Lamp. 9. Play & Del: Play press, you can recall the saved images in the flash memory of your Digital Presenter. Press Del if you would like to discard the saved image. 10. Zoom +/-: Make the image larger & smaller. 11. BRT+/-: Press the keys to make the image brighter or darker. 12. Menu: Click on Menu, you may adjust all the functions on the screen. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCRDING TO THE INSTRUCTIONS. 1 2 3 4 5 6 7 8 9 10 11 12

The IR commands from a protocol converter can be sent directly to an IR emitter located behind the dark window on the front of the camera. This permits the camera to be controlled as part of a system without the neces- sity of attaching external IR emitters. The 3.5 mm mini connector on the body, “IR Control Input,” is connected internally to an IR emitter located near the detector. This detector can receive the IR signals from the emitter. A visible red LED is also located behind the camera window and blinks when the IR emitter is operating

This chapter describes the basic and advanced functions of the Digital Presenter, how to use the OSD (On Screen Display) menu. 4.1 Getting Started 4.1.1 Turn on the Digital Presenter. ¾ Option 1: Press button. ¾ Option 2: Press button of remote controller. 4.1.2 Lens focus ¾ Turn the lens to optimize the focus 4.1.3 Zoom in / Out ¾ Press the control button 4.1.4 Switch source ¾ Press to Choose signal source between Camera 220E or PC. That signal is sent to the projector.

4.1.6 Enter AWB (Auto White Balance) ¾ press to set the auto white balance. 4.1.7 Capture Image & Review of captured images ¾ How to capture an image Method 1：Press on the remote to capture image that you would like to save. Method 2：Follow the steps using the pad buttons on the Camera. 2.1 First, press to go to the OSD (On Screen Display). 2.2 Second, press^ v select the "Storage" icon, and press "Enter AWB" button Then select “Capture”, and press to capture image that you would like to save. ¾ Review of capture images: Method 1：Operation from Camera pad buttons. Method 1： Operation from Camera pad buttons.

button to go to OSD interface. 1.2 Second, press ^ v to select the "storage" icon, and press Then select “Playback”, and press , so you can see all captured thumbnail images on the screen. 1.3 You can press button to select the image which you want to magnify. (Enlarge to full screen) Then press , the image will appear full screen. Method 2: Using the Remote Control: 2.1 First please press the button to see all thumbnail images that you had captured. Then, press button to select image which you want to enlarge and press , the image will now be showen become full screen. Model 3：Use the remote to operate the OSD interface operation. 3.1 Press the button to go into the OSD interface. Method 2: Using the Remote Control: Method 3： Use the remote to operate the OSD interface operation.

icon and press . Then select “Playback”, and press , so you can see all captured thumbnail images on the screen. 3.3 Then, press button to select the thumbnail image which you want to magnify and press , the image will show full screen. 4.2 Showing the OSD (On Screen Display) Menu ¾ Option 1: Press button to show the OSD Menu ¾ Option 2: Press button of remote control. 4.3 Select function: ¾ Option 1: Press the ^ v< > to search functions then press the Enter key to enable your selection. ¾ Option 2(On remote control): Press ^ v< > to navigate functions then press the Enter key to invoke your selection.

The Main Menu containing five icons and detail functions will be explained in next page. Setting Display Source Storage Exit ¾ VGA Mode (Computer Image) Layer 1 Layer 2 Layer 3 Function Lamp On / Off / Exit Select Lamp On or Off. Night view On/Off Select Night view function On or Off. Language English, Deutsch, Francais, Italiano, Espanol, Русский, , , Exit Select a preferred language on the menu. Output Format XGA 75Hz, XGA 60Hx, SVGA 75Hz, SVGA60 Hz Select a suitable output format. Factory Reset Enter/Exit Reset all the values to the factory default. Setting Exit Exit this menu. 13 The Main Menu contains five icons, The functions are shown in the following table.

0-40 ( for NTSC) Brightness adjustment Zoom Digital Zoom (100% to 1600%) Adjust Zoom 100% ~ 1600%. Gamma Photo / Text Select Photo/Text Mode. Image Normal / Gray / Film Select Normal/Gray/Film Mode. Flip On/Off Adjust the image up and down by 180°. Freeze On/Off Use Freeze to retain the image on the screen. Display Exit Exit this menu. Presenter Source VGA In Select images of Presenter or VGA Input. Capture Capture the image of Presenter. Playback Present the captured image. Delete Delete the captured image. Delete All Delete all images. Delete All Enter/ Exit Memory Format Memory Format Format Enter/ Exit Storage Exit Exit this menu. Exit menu. 14

Layer 1 Layer 2 Layer 3 Function Brightness 0-46 (for PAL) 0-40 ( for NTSC) Brightness adjustment Gamma Photo/Text Select Photo/Text Mode. Image Normal/Gray Select Normal/Gray Mode. Freeze On/Off Use Freeze to retain the image on the screen. Display Exit Exit this menu. Lamp On/Off Turn On/Off lamp Advance Full Range On/off Night view On /off Exit Switch Full range on/off and night view on/off Language English /中繁/中簡/Exit Select a preferred language on the menu. Factory Reset Enter / Exit Reset all the values to the factory default. Setting Exit Exit this menu. Exit menu. Camera as Switch The DVI Adapter connects the DVI output to an input for a computer (VGA). When this input is used, the “SOURCE” button or menu command will switch the output between the “CAMERA IMAGE” and the “COMPUTER” image (VGA) on the DVI adapter. 15 When camera is “OFF” the computer VGA signal from the “DVI Port” adapter will pass through the camera to the “VGA Out” port. Thus the camera can be in a path to a projector and will let the signal pass through. If the camera is turned on the VGA pass through remains until the “Source” button is pressed. The camera image then becomes the output. Note: The camera must be plugged in to have this pass through feature.

Installation 2. Connect the Camera and PC with USB Cable . Follow instructions for driver download. 3. Chapter 5 Before you install MR2004, please be sure your system meets these requirements. • Operation System • Windows XP • Windows 2000 • ME • 98 • 98SE • CPU • Intel Pentium II 350MHz over and above • 64MB RAM • Minimum 40MB HD space 1. Insert the software CD in your computer’s CD-ROM. 4. The “Auto run” program will be shown automatically, if you would like to install MR2004, please press Install MR2004 • CD ROM or DVD ROM 16

4. While the License Agreement picture is shown, select 『I accept the terms in the license agreement 』and press Next to go next. 5. 6. 17

difference. 6. Please press Install to begin installation. 7. The installation is processing, if you would like to cancel, please press Cancel to stop installation. 7. 8. 9. 18

FFuunnccttiioonnss This chapter will introduce all functions of MR2004, the user interface of MR2004 as below. Tool bar Preview area Tool bar of Preview window Work and display area go to the PC “Start”, and look at “All Programs” to find MR2004. The basic window with the functional areas indicated follows: 11. 20

z Open：Open old project in stored file z Save：Save present edited project z Save As：Save to be a new project or given file z Save Image：Save reedited JPG image z Import From Device：Import an image from memory device (Only for certin devices.) z Export to PPT： Export the image to be Power Point file format z Language：Select English, Traditional Chinese, Simplify Chinese user interface. 2. Real Time One image can be imported from input device such as Document Camera. Available functions are Freeze, Capture, Paint tool and Full screen. Notice：If the image can’t be displayed normally in real time mode, please double check the connection between computer with camera. The Tool Bar Functions are described. 21

Functions in this mode are File, Paint tool and Full screen. The Freeze and capture are not available in edit mode. 4. Freeze The image can be frozen in real time mode. (*This function is only available in real time mode) 5. Capture You can capture images which are saved as JPG files in the default folder is C:\Program File\MR2004\, (* This function is only available in real time mode.) 6. Paint and Annotation tool This is a basic annotation or drawing tool, it can be used in real time and the edit mode, right click for tool, left click to mark any region in the image. 1. Pointer：Mouse pointer 2. Laser：Click "Laser" to show a spot on the screen 3. Handwrite：Click and drag to draw a line or annotate 4. Line：Click and drag to draw a line 5. Ellipse：Click and drag to draw a circle 6. Rectangle：Click and drag to draw a rectangle 7. Eraser：Click and drag to clear lines 8. Clear all：Clear all lines on the picture 9. Color：Choose the line color 10. Thickness：Choose thickness of lines. (1 to 99) 7. Full Screen The image can be increased to full screen with the "full screen" function. It is available in Real time mode, and Edit mode. Right -click on the picture and then the paint tool will appear. The lower Preview window tool bar appears for the Edit mode. Use "ESC" to return to normal size window. 22

） One image can be captured in the MR2004 via CPT-I connection device of MH400 that is more efficiency then “capture” function in real time mode. 9. Image beforehand view tool ：Insert a picture from image file. Bring in picture from file. ：Change picture order in the sequence. ：Copy picture and save in a JPEG file. ：Delete picture。 Notice：The source image can’t be disconnected with “Delete Picture” function. The picture can be change on the screen with “Page up“or”Page Down” button. In the "Edit Mode" the lower Preview Area images can be selected using the "Page Up" or "Page Down" button. This function does not operate with the Camera. Please ignor. 23

Simplify-Chinese, please choose 「English」. 2 Display image： 2.1 Real Time Operation：Import a line image from Camera. Document Camera) 2.2 Import From Device,：Import images from Camera. May not always be operative. device. 2.3 Edit model open old file,：Use preview tool（ ）to open an old file in edit mode.. 24

25

and then save the picture. 4 Save： 4.1 Save MR2004 file：Save as “*.m2” file format to C:\Program Files\MR2004 4.2 Export to PPT format：After editing and arranging images, the function can export to power point file. Click the small picture After 26

If none of the suggested solutions solves the problem, call your dealer or your service center. Problem 1: No picture from the Camera. Solution - 1: Wait a few seconds, press desired source selector again. 2: Press a different source, then press-desired source again. 3: Check if the power is turned on. (Pilot Light On?) 4: Make sure the document or object is positioned under the camera. Problem 2: Cannot Focus, camera will not focus properly. Solution - To properly focus: Move Camera head further away from object. focus and then zoom out to desired distance. Problem 3: Image is too bright or dark. Can not see desired part of the image because it is too bright or dark. Solution – Adjust the BRT+/- Control Button on the remote control. * The updated information will be regularly released on the Dukane web site, please visit our web site http://www.dukcorp.com/av. 2 1 5. If in USB operation disconnect and then reconnect the USB Cable 27

St. Charles, Illinois 60174 www.dukcorp.com/av Toll-free: 800-676-2487 Fax: 630-584-5156 e-mail: [email protected] Audio Visual Products #401-220E-01