Sauder Palladia 420613 Manual 

BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE. English pg 1-22 Français pg 23-25 Español pg 26-28 Lot # 502576 04/18/17 Purchased: __________________ Be sure to give us a ring before making any returns. 1-800-523-3987 Dresser Palladia Collection | Model 420613 Need help? Visit Sauder.com to view video assembly tips or chat with a live rep. Prefer the phone? Call 1-800-523-3987. Share your ...

Assembly Tools Required 2-3 4-5 6-22 23-25 26-28 29-30 31 Part Identifi cation Hardware Identifi cation Assembly Steps Français Español Safety Warranty Hammer Not actual size No. 2 Phillips Screwdriver Tip Shown Actual Size Skip the power trip. This time. 420613 www.sauder.com/services Page 2 Part Identifi cation å While not all parts are labeled, some of the parts will have a label or an inked letter on the edge to help distinguis ...

Now you know our ABCs. 420613 www.sauder.com/services Page 3 A2 B2 C3 D2 E2 F2 H I2 M N O2 R S T R2 R2 D245 D271 D60 D979 D979 D262 D257 D171 M64 M64 ...

å Screws are shown actual size. You may receive extra hardware with your unit. TWIST-LOCK® 10F FASTENER - 12 FOOT - 1 3E MOLDING CONNECTOR - 2 17F TIE PLATE - 2 3G NAIL - 60 1N CAM SCREW - 6 8F 1F HIDDEN CAM - 10 2F CAM DOWEL- 4 420613 www.sauder.com/services Page 4 8G DRAWER FRONT BRACKET - 2 LARGE DRAWER FRONT BRACKET - 4 9G 35AA 35AD 35AC UNIVERSAL CABINET RAIL - 12 DRAWER RIGHT - 6 DRAWER LEFT - 6 Locate this nylon SAFETY S ...

å Screws are shown actual size. You may receive extra hardware with your unit. 1S BLACK 9/16" LARGE HEAD SCREW - 45 SILVER 1/2" MACHINE SCREW - 8 38S GOLD 5/16" FLAT HEAD SCREW - 48 3S BLACK 1-1/4" FLAT HEAD SCREW - 9 7S BROWN 1" FLAT HEAD SCREW - 6 12S GOLD 1" MACHINE SCREW - 4 50S 420613 www.sauder.com/services Page 5 30S BLACK 1-9/16" FLAT HEAD SCREW - 30 BLACK 1-15/16" FLAT HEAD SCREW - 2 113S ...

video assembly tip is available at www.sauder.com/services/tips å Assemble your unit on a carpeted fl oor or on the empty carton to avoid scratching your unit or the fl oor. å To begin assembly, push a SAUDER TWIST-LOCK® FASTENER (10F) into the large holes in the ENDS (A2 and B2), UPRIGHT (C3), and BOTTOM (E2). 420613 www.sauder.com/services Page 6 10F A2 B2 10F 10F (12 used) Do not tighten the TWIST-LOCK® FAST ...

Then, insert the metal end of a CAM DOWEL (2F) into each HIDDEN CAM. 420613 www.sauder.com/services Page 7 E2 Arrow 1F 2F Insert the metal end of the CAM DOWEL into the HIDDEN CAM. Arrow Do not tighten the HIDDEN CAMS in this step. (4 used) ...

in the MOLDINGS (M, N, and R). Step 3 420613 www.sauder.com/services Page 8 M N 17F 17F Use your hammer to tap the MOLDING CONNECTORS (17F) into the notches in the MOLDINGS. R Flat end Flat end ...

nine BLACK 1-1/4" FLAT HEAD SCREWS (7S). å NOTE: Do not overtighten the SCREWS into the TOP. 420613 www.sauder.com/services Page 9 M N R D2 Long fl at edge Finished surface BLACK 1-1/4" FLAT HEAD SCREW (9 used in this step) 7S Remember: Righty tighty. Lefty loosey. Surface with holes ...

(24 used in this step) 3S å Fasten the UNIVERSAL CABINET RAILS* (35AA) to the ENDS (A2 and B2) and both surfaces of the UPRIGHT (C3). Use twenty-four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and ...

the TOP (D2). Tighten two TWIST-LOCK® FASTENERS. å Fasten the UPRIGHT (C3) to the TOP (D2). Tighten two TWIST-LOCK® FASTENERS. 420613 www.sauder.com/services Page 11 B2 C3 D2 N How to use the SAUDER TWIST-LOCK® FASTENER 1. Insert the dowel end of the FASTENER into the hole of the adjoining part. NOTE: The dowel end of the FASTENER must remain fully inserted in the hole of the adjoinin ...

two TWIST-LOCK® FASTENERS. å Fasten the BOTTOM (E2) to the UPRIGHT (C3). Use two BLACK 1-15/16" FLAT HEAD SCREWS (113S). å Fasten the RIGHT END (A2) to the BOTTOM (E2) and RIGHT MOLDING (M). Tighten four TWIST-LOCK® FASTENERS. Step 7 420613 www.sauder.com/services Page 12 C3 B2 A2 E2 M Edge with TWIST-LOCK® FASTENER Edge with HIDDEN CAMS Surface with TWIST-LOCK® FASTENERS BLACK 1-15/16" ...

BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: Be sure the edges of the METAL BRACKETS are even with the edge of the BOTTOM. å Fasten the BOTTOM MOLDING (S) to the BOTTOM (E2). Tighten four HIDDEN CAMS. å Fasten the PLINTHS (R2) to the ENDS (A2 and B2) and BOTTOM (E2). Tighten two TWIST-LOCK® FASTENERS and use two BLACK 9/16" LARGE HEAD SCREWS (1S). 420613 www.sauder.com/service ...

six BLACK 9/16" LARGE HEAD SCREWS (1S). å NOTE: Be sure the edges of the METAL BRACKETS are even with the edge of the BASE. å Fasten the BASE (H) to the BOTTOM (E2). Use six BLACK 9/16" LARGE HEAD SCREWS (1S) through the METAL BRACKETS and into the BOTTOM. Step 9 420613 www.sauder.com/services Page 14 E2 4G H H BLACK 9/16" LARGE HEAD SCREW (12 used in this step) 1S ...

and lay it over your unit. å Make equal margins along three edges of the BACK (F2). The BACK will overhang the BOTTOM (E2) slightly. Push on opposite corners of your unit if needed to make it "square". å Fasten the BACK (F2) to your unit using the NAILS (1N). å NOTE: Be sure to tap NAILS into the holes that line up over the UPRIGHT (C3). å NOTE: Perforations h ...

å Push six HIDDEN CAMS (1F) into the DRAWER BRACES (M64). Step 11 420613 www.sauder.com/services Page 16 I2 O2 O2 I2 I2 I2 8F (6 used) Arrow The arrow in the HIDDEN CAM must point toward the hole in the edge of the board. Hole Do not tighten the HIDDEN CAMS in this step. M64 M64 M64 M64 M64 M64 Arrow 1F (6 used) ...

DRAWER FRONTS (O2). Use six BROWN 1" FLAT HEAD SCREWS (12S). 420613 www.sauder.com/services Page 17 O2 O2 T T BROWN 1" FLAT HEAD SCREW (6 used in this step) 12S Rounded edge Finished surface Rounded edge Finished surface Don't worry. It isn't Rome. This can be built in a day. Surface without groove Surface without groove ...

into the grooves in the DRAWER SIDES (D245 and D271). You may need to gently tap them in with a hammer. å NOTE: The DRAWER FRONT BRACKETS are marked "RH" and "LH" for easy identifi cation. å Fasten the DRAWER FRONT (O2) to the DRAWER FRONT BRACKETS (8G). Use four BLACK 9/16" LARGE HEAD SCREWS (1S). å Slide the DRAWER BOTTOM (D9 ...

DRAWER SIDE (D271). Use four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2. å NOTE: The glides are not intended to rotate. å Fasten two KNOB SETS (130K) to the DRAWER FRONT (O2). Use two GOLD 1" MACHINE SCREWS (50S). å Repeat this step for the other drawers. Use the SILVER 1/2" MACHINE SC ...

(1 used in this step) 1S 13M å Carefully stand your unit upright and position your unit in its fi nal location. We recommend using the SAFETY STRAP (60M) for added stability. å NOTE: Do not turn the SAFETY DRYWALL ANCHOR (61M) into a wall stud. If you prefer to fasten the SAFETY STRAP (60M) to a wall stud, go to your local hardware store for proper hardware. å I ...