Roger RUD-2 Operation & User’s Manual

R U D - 2 v 2 . 0 Document version: Rev. A Firmware version RUD-2_fv2.0.4 U s e r s M a n u a l ...

2012-08-03 [2] C o n s t r u c t i o n a n d U s a g e RUD-2 is a miniature reader for EM 125 kHz proximity transponders. The reader is supplied from serial USB port which is also used for communication with the device. The RUD-2 can be used as card enroll reader for access control system or any other application which requires car ...

2012-08-03 [3] Card codes window. In order to interrupt the reading process, you need to use the Stop reading command. The cards read can automatically be copied to the Clipboard (option: Copy card code to clipboard). By using it, the card codes can be moved to other applications or saved to a text file (option: Append card code to f ...

2012-08-03 [4] to 8 cm. Nevertheless it is a subject of serious fluctuations depending on the card’s type and its characteristics. In particular, the range will be seriously reduced for miniature key fobs. You can assume that in this case you should touch a reading surface with a card and hold a card in a stable position. When the ...

2012-08-03 [5] Technical Data Power supply 5 VDC directly from the USB port Average current consumption 80 mA Cards EM 125 KHz (EM 4100/4102 compatible) proximity transponders Reading distance Up to 8 cm for ISO cards (while in an optimal relative location to the reader) Reading time ~ 200ms Working temperature range +5...+45º C Rel ...