Sanus VLF525 Instruction Manual

Si tiene preguntas mientras realiza la instalación, llámenos. 1-800-359-5520 Estamos listos para ayudarlo. We’ll Make It Stress-Free If you have any questions along the way, just give us a call. 1-800-359-5520 We’re ready to help! ...

No — Perfect! Yes — This mount is NOT compatible. Visit MountFinder.Sanus.com or call 1-800-359-5520 to find a compatible mount. Please read through these instructions completely to be sure you’re comfortable with this easy install process. Also check your TV owner’s manual to see if there are any special requirements for mounting your TV. If you ...

Parts and Hardware for STEP 1 Vertical TV Bracket NOTE: Not all hardware included will be used. WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts! M4x30 mm M5x30 mm M6x35 mm M8x35 mm Sp ...

M8 x 35 mm 22 mm M8 x 16 mm M8 x 25 mm 2.5mm M8 x 50 mm 5mm M6 x 20mm M6 x 12mm x4 TV Screws TV Washers Spacers Thumb Screws 05 x4 06 x4 07 08 x4 x8 x4 ...

1.2 Select TV Screw Length Hand thread screws into the threaded inserts on the back of your TV to determine which screw diameter (M6 or M8) to use. FLAT BACK ROUND BACK CABLES INSET HOLES If your TV has a flat back AND you want your TV closer to the wall, use the shorter screws. Spacers and longer screws are supplied to accommodate: ● Round/irregular back TVs ● TVs with inset mounting holes ● Extra space needed f ...

2. Slide the upper 01 and lower 02 TV brackets onto the ends of the vertical TV bracket 04 . 1.3 Attach TV Brackets 03 01 08 1 01 04 02 04 01 03 2 ...

loosely install using the spacer, TV screw and washer combination (a) or (b) you selected for your TV. CAUTION: Avoid potential personal injury or property damage! The TV Bracket assembly MUST BE installed with the release cord R oriented on the bottom of the TV as shown. b Spacer, screw and washer a Screw and washer 01 04 02 3 R If your TV included inset spac ...

5. Visually line up the locator hole B in the lower TV bracket 02 , with a hole in the vertical TV bracket 04 and install using two thumb screws 08 . Tighten the four thumb screws 08 on the upper 01 and lower 02 TV brackets. 01 5 4 08 B 01 02 04 04 08 02 ...

...

5⁄16 in. x 2 ¾ in. For concrete installations ONLY UX10x60R Parts and Hardware for STEP 2 Wall Plate Template Lag Bolt Concrete Anchors WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damag ...

personal injuries and property damage! ● Drywall covering the wall must not exceed 5/8 in. (16 mm) ● Minimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm) ● Minimum horizontal space between fasteners: 16 in. (406 mm) ● Stud centers must be verified – not all walls have conventional 16 in. (406 mm) or 24 in. (610 mm) stud spacing 1. Locate a nail/screw in the stud using a stud find ...

template 09 and tape in place. NOTE: For assistance in determining wall plate location, see HeightFinder at sanus.com. IMPORTANT: Be sure you mark and drill into the center of the stud. 5. Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. IMPORTANT: Pilot holes must be drilled to a depth ...

7. Slide the covers C open on the wall plate 10 to expose the mounting holes. 09 6 10 C C 7 ...

NOTE: Hold the wall plate 10 in place when tightening the first lag bolt 11 to keep the plate from shifting out of place. CAUTION: Avoid potential personal injury or property damage! All four lag bolts 11 MUST BE firmly tightened to prevent unwanted movement of the wall plate 10 . Ensure the wall plate is securely fastene ...

● Mount the wall plate 10 directly onto the concrete surface ● Minimum solid concrete thickness: 8 in. (203 mm) ● Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm) ● Minimum horizontal space between fasteners: 24 in. (610 mm) ● For concrete applications, arm 13 (STEP 3) must remain centered in wall plate 10 . Keep this in mind when selecting the wall plate locati ...

CAUTION: Be sure the anchors 12 are seated flush with the concrete surface. 4. Slide the covers C open on the wall plate 10 to expose the mounting holes. 10 C C 4 09 3 12 ...

NOTE: Hold the wall plate 10 in place when tightening the first lag bolt 11 to keep the plate from shifting out of place. CAUTION: Avoid potential personal injury or property damage! All four lag bolts 11 MUST BE firmly tightened to prevent unwanted movement of the wall plate 10 . Ensure the wall plate is securely fastene ...

STEP 3 Attach TV to Wall Plate Arm Assembly WARNING: Before starting assembly, verify this part is undamaged. If damaged, contact Customer Service. Never use damaged parts! 13 x1 ...

1 CAUTION: Avoid potential personal injury or property damage! The arm assembly 13 MUST BE installed with the lock lever L oriented on the bottom as shown. 1. Slide the lock lever L to the unlock position. Unlock Lock L L 13 ...