ring VIDEO DOORBELL Getting Started

App The Ring app walks you through setting up and managing your Ring Video Doorbell. The Ring app is available for iPhone, iPad, and Android. Search for “Ring” in one of the app stores above, or visit ring.com/app Download from Windows Store Your Wi-Fi password Grab your Wi-Fi password It’s required for the in-app setup. Write it down ...

the Ring App If you haven’t already, open the Ring app and select Create Account. Once you’re logged in, tap Set Up a Device to begin the setup process. When prompted, select Doorbells and follow the in- app instructions. Push the Front Button to Test your Ring Doorbell After setup, push the front button on your Ring Doorbel ...

Location For optimal performance, install your Ring Doorbell four feet above the ground. If you’re connecting to existing doorbell wiring that’s higher than four feet, and want to angle your Ring for a better view, you can purchase a Wedge Kit at: ring.com/accessories Camera field of view Motion detection range 7 6 ...

at the breaker. Then remove your existing doorbell from the wall and disconnect the wires. If you notice a diode when you remove your wired doorbell, this means you will need to install the included diode with your Ring. Diode If wiring to an exis ...

(optional) On stucco, brick, or concrete, use the provided bit to drill holes in your wall, then insert the anchors. If you’re installing on wood or siding, put the anchors in that drawer of stuff you never use and skip this step. Keep the orange screwdriver handy. You’ll need it to take your Ring off the wall for charging. Install th ...

wall (or into the anchors, if installed) until they are flush with the mounting bracket, and the bracket is flat against your wall. If your wall is not completely flat, be careful not to screw the bracket in so tightly that it bends or bows. Connect the Wires (optional) Connect your doorb ...

connecting the diode the wrong way won’t do any harm. If your doorbell doesn’t ring, just reverse the diode. How and When to Use the Diode If your doorbell is digital (plays an electronic melody), attach the diode to the two screws on your bracket. Put the gray indicator on the same side as the wire that leads to your inte ...

Doorbell Use the star-shaped end of your Ring screwdriver to tighten the security screws on the bottom of your Ring Doorbell. If you wired in your Ring, now you can restore power at the breaker. Congratulations, you’re done! Sign Up for Ring Protect Your Ring Doorbell includes 30 free days of Ring Protect, a subscription service that store ...

setup help? Get your Wi-Fi password just right. The most common setup issues come from entering the wrong Wi-Fi password. These passwords are case- sensitive, and every little error counts. Reboot your router. If you know you entered the right password but you’re having no luck, try turning your Wi-FI router off, wait 30 seconds, then turn ...