RIDGID SeeSnake Micro Operator's Manual

carefully before using this tool. Failure to understand and follow the contents of this manual may result in electrical shock, fire and/or serious personal injury. SeeSnake® micro™ Inspection Camera 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com ...

General Safety Information Work Area Safety...............................................................................................2 Personal Safety .................................................................................................2 Battery Precaution .............................................................................................2 SeeSnake® micro™ Inspection Camera Use and Care....................... ...

TestEquipmentDepot.com ...

structions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. SAVE THESE INSTRUCTIONS! Work Area Safety • Keep your work area clean and well lit. Cluttered benches and dark areas may cause accidents. • Do not operate electrical devices or vi- sual inspection tool in explosive at- mospheres, such as in the presence of flammabl ...

properly working. Any tool that cannot be controlled with the switch is danger- ous and must be repaired. • Store idle equipment out of the reach of children and other untrained persons. Equipment is dangerous in the hands of untrained users. • Maintain the visual inspection tool with care. Properly maintained tools are less likely to cause injury. • If unit is dropped check for breakage of parts, and any other c ...

received, including interference that may cause undesired operation. NOTE! This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip- ment generates uses and can radiate radio frequency energy and, if not in- s ...

Ridge Tool Company 5 Storage Temperature ..-4°F to 158°F (-20°C to 70°C) Water Resistance........Image head and extensions to 10' (3.05 m) water depth (When assembled.) Maximum Distance....Optional cable ex- tensions can be as- sembled to make cable up to 30' (9.74 m) long Standard Equipment The SeeSnake micro Inspection Camera comes with the following items: Figure 1 – System Components Assembly To Install Batte ...

Set-Up WARNING To prevent serious injury, proper set-up of the tool and work area is required. The following procedures should be followed: 1. Review General Safety Information sec- tion of this manual (Page 2). 2. Check work area for: • Adequate lighting • Flammable liquids, vapors or dust that may ignite. 3. Follow tool set-up according to specific tool operator's manual. Operating Instructions Do not use excessiv ...

Ridge Tool Company 7 Figure 9 Figure 10 When in use, the snake should easily ma- neuver itself into position going forward. TIP! The cable can be bent into a certain shape. This may help you maneuver the cable into tight areas. NOTE! The SeeSnake micro Inspection Cam- era was not designed to take the place of a drain cleaner or electrical/plumbing fish sticks or tapes. In limited instances, the SeeSnake micro Inspectio ...

Ridge Tool Company 8 SYMPTOM POSSIBLE REASON SOLUTION Display turns ON, but does not show image. LEDs on imager head are dim at max bright- ness, display switches between black and white, color display turns itself OFF after a brief period. Unit will not turn ON. Troubleshooting Loose cable connections. Imager head covered by debris. Batteries low on power. Dead batteries. Check cable connections, clean if re- quired. Re ...