Moxa Technologies EtherDevice EDS-2016-ML Series Quick Installation Manual

Moxa EtherDevice Switch Version 1.0, November 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-21-52 ...

Overview The EDS-2016-ML Series industrial Ethernet switches have 16 10/100M ports and up to two optical fiber ports with SC/ST connector type options. The EDS-2016-ML provides 12/24/48 VDC redundant power inputs, and the switches are available with a standard operating temperature range from -10 to 60°C, or with a wide operating temperature range fro ...

Features High Performance Network Switching Technology • 10/100BaseT(X) auto-negotiation speed, full/half duplex mode, auto MDI/MDI-X connection, and 100BaseFX (SC/ST type, Multi/Single mode). • IEEE 802.3 for 10BaseT, IEEE 802.3u for 100BaseT(X) and 100BaseFX. • IEEE 802.1p for Quality of Service (QoS) traffic prioritized function. • Store-and ...

Panel Layout of EDS-2016-ML (Standard type) 1. Grounding screw 2. Terminal block for power input (PWR1, PWR2) and relay output 3. DIP switch 4. Power input PWR1 LED 5. Power input PWR2 LED 6. Fault LED 7. Port number 8. 10/100 BaseT(X) Port 9. TP port’s 100 Mbps LED 10. TP port’s 10 Mbps LED 11. Model name ...

Panel Layout of EDS-2016-ML (SC type) 1. Grounding screw 2. Terminal block for power input (PWR1, PWR2) and relay output 3. DIP switch 4. Power input PWR1 LED 5. Power input PWR2 LED 6. Fault LED 7. Port number 8. 10/100 BaseT(X) Port 9. TP port’s 100 Mbps LED 10. TP port’s 10 Mbps LED 11. 100BaseFX Port 12. FX port’s 100 Mbps LED 13. Model name ...

Panel Layout of EDS-2016-ML (ST type) 1. Grounding screw 2. Terminal block for power input (PWR1, PWR2) and relay output 3. DIP switch 4. Power input PWR1 LED 5. Power input PWR2 LED 6. Fault LED 7. Port number 8. 10/100 BaseT(X) Port 9. TP port’s 100 Mbps LED 10. TP port’s 10 Mbps LED 11. 100BaseFX Port 12. FX port’s 100 Mbps LED 13. Model name ...

DIN-Rail Mounting There are two options for DIN-rail mounting that can be used on an EDS. Option 1 is the default type when the product is shipped. Option 1 (Default): When shipped, the metal DIN-rail mounting kit is fixed to the back panel of the EDS. Mount the EDS on the corrosion-free mounting rail that adheres to the EN 60715 standard. Suggested In ...

Suggested Installation Method STEP 1: Detach the metal DIN-rail mounting kit from the back panel and attach it to the side panel (mold side) in either the horizontal or vertical direction as indicated in the figure below. STEP 2: Insert the upper lip of the DIN-rail kit into the mounting rail. STEP 3: Press the device towards the mounting rail until it ...

Wall Mounting (optional) For some applications, you will find it convenient to mount EDS on the wall, as illustrated below. STEP 1: Remove the aluminum DIN-Rail attachment plate from EDS’s rear panel, and then attach the wall mount plates, as shown in the diagram below. EDS-2016-ML Series EDS-2016-ML Fiber Series STEP 2: Mounting EDS on the wall req ...