Moxa Technologies ioMirror E3200 Series Quick Installation Manual

Quick Installation Guide Ethernet Peer-to-Peer I/O Version 1.0, January 2019 Technical Support Contact Information www.moxa.com/support Moxa Americas: Toll-free: 1-888-669-2872 Tel: 1-714-528-6777 Fax: 1-714-528-6778 Moxa China (Shanghai office): Toll-free: 800-820-5036 Tel: +86-21-5258-9955 Fax: +86-2 ...

Package Checklist • 1 x ioMirror E3200 Series peer-to-peer I/O product • 1 x quick installation guide (printed) • 1 x LDP1602 LCD module (optional) Specifications Power Parameters Input Voltage 12 to 48 VDC Power Consumption 136 mA @ 24 VDC Environmental Limits Operating Temperature -10 to 60°C (14 to 140°F) Storage Temperature (package include ...

DI Wet Contact DO Alarm Output Mounting There are two ways to mount the ioMirror E3200 Series: DIN-rail or wall mounting. • Mounting on a DIN rail Pull out the bottom slider; latch the unit onto the DIN rail, and then push the slider back in. • Mounting on a wall Pull out both the top and bottom sliders and align the screws accordingly. The heads o ...

NOTE Be sure to configure the host PC’s IP address to the same subnet as the ioMirror E3200. For example: 192.168.127.253. Restore Factory Defaults There are three ways to restore the ioLogik to factory default settings. 1. Hold the RESET button for 5 seconds. 2. Right-click on the specific ioMirror in the ioMirrorAdmin utility and select Reset to De ...