modway MOD-5492 Quick Start Manual
Text of modway MOD-5492 Quick Start Manual
JCBB BOLT M8 X 16MM
M4 ALLEN KEY (BALL SHAPE)LONG
C
D
F
G
SPRING WASHER 1/4"
FLAT WASHER 1/4''
MOD-5492/ MOD-5493 / MOD-5494 / MOD-5495
Thank you for purchasing the MODWAY BED !
Before you start,here is some helpful advice:
1.We suggest you spend a short time reading through this leaflet and then follow the simple step by step
instructions.
2.Owing to the size and weight of the bed, we recommed that it is assembled by two adults,on a carpeted or
padded
A x 4
E x 2
Hardware & Tool required
STEP 1 :
Place SIDE RAILS (3) and FOOTBOARD (2) on a carpeted or padded area as shown. Attach FOOTBOARD (2) with SIDE RAILS
(3) together by inserting JCBB BOLT M8 x 16MM (A).Tighten up the bolts with M5 Allen Key (B). Place SPRING WASHER 14" (E)
and FLAT WASHER 14" (F) into JCBC BOLT M6 x 35mm (C). After that, inserting JCBC BOLT M6 x 35mm (C) at bottom side of
SIDERAILS (3) and FOOTBOARD (2). Tighten up the
D x 3
Hardware & Tool required
STEP 3 :
STEP 4 :
Page 3/4
Customer Service 908-368-1025
Place the balance of Rails (5) equally on the Center Rail (4). Then screw it up with CSK Screw M4 x 32mm (G) on both side of
Rail (5).
Hardware & Tool required
G x 28
3x
E x 3
28x
D
G
C
H x 1
F
4
5
5
6
Place the CENTER RAILS (4) on Leg Supports (6). Parallel place three RAILS (5) vertically on the Center Rail (4) as shown with the
center holes lined up. Att
STEP 5 :
Page 4/4
Customer Service 908-368-1025
Remark: Do not sit or lie on
platform without the
mattress
Assembly is completed.The bed is ready to enjoy now !
MOD-5492/ MOD-5493 / MOD-5494 / MOD-5495
www.modway.com