modway EEI-3936 Manual
Text of modway EEI-3936 Manual
EEI-3936/ EEI-3937/ EEI-3938
Customer Service 609-256-9000︱www.modway.com
Page 1 of 4
Thank you for purchasing the MODWAY SINGLE BASIN.
Before you start, here are some helpful advice:
1. We suggest you spend a short time reading through this leaflet and then follow the simple step-by-step
instructions.
2. Tools and Materials required: a. Flat, nonabrasive work surface such as a blanket or smooth cardboard;
b. Sealant.
3. Owing to the size and weight of t
EEI-3936/ EEI-3937/ EEI-3938
Customer Service 609-256-9000︱www.modway.com
Page 2 of 4
STEP 1:
1. Please put 1 piece of Metal Frame Side (1) on a carpeted or padded surface.
2. Attach 2 pieces of Upper Side Bars (2), 2 pieces of Bottom Side Bars (3) and 2 pieces of Upper Middle
Bars (4) to the Metal Frame Side (1) by using 12 pieces of Bolts (A) as shown. Don’t fully tight Bolts (A).
3. Repeat the same way to assemble the other Metal Frame Side (1) as
EEI-3936/ EEI-3937/ EEI-3938
Customer Service 609-256-9000︱www.modway.com
Page 3 of 4
STEP 3:
1. Carefully put Top (5) on the assembled Base from the Step 1 by two adults as shown. Set Top (5) on the
Base's at the back and leave about 5mm distance from the edge for all other three sides.
2. Make sure the Top (5) fits closely and pour Sealant (Not provided) for the sealing as shown.
STEP 4:
1. Put 6 pieces of Rubber Suckers (C) on the pre-installed Clip
EEI-3936/ EEI-3937/ EEI-3938
Customer Service 609-256-9000︱www.modway.com
Page 4 of 4
Assembly is complete. Your single basin is ready to enjoy now!
Attention:
If the Single Basin is not
stable, you may adjust
it by alignment pin.