Mocka Watson 8 Assembly Instructions Manual

Text of Mocka Watson 8 Assembly Instructions Manual

Phillips & Flathead screwdrivers and hammer required

Hardware Supplied dowel x36 bolt x20 locking nut x20 shelf plug x1 long screw x1 *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%. For quicker assembly, we recommend the use of a power drill on a low-speed setting. Watson 8 Cube Storage Unit

Watson 8 Cube Storage Unit

Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. mocka.co.nz | mocka.com.au A A A A A A A A A A I I I I A 1 7 Insert 10 x bolts (A) into panel [1]. Attach panel [7] into panel [1] and secure with 4 x long screws (I). Tighten with a screwdriver. 3 3 3 4 D D D D D D Attach panel [3] into panel [4] and secure with 6 x long screws (D) 6 x Tighten with a screwd

Watson 8 Cube Storage Unit

Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. mocka.co.nz | mocka.com.au Attach panel [3] into panel [4] and secure 6 x bolts (A) and 6 x dowel (C). A 3 3 3 4 A A A A C C C C 5 A A C B A x2 C B x2 Screw in 2x bolts (A) and insert 2x dowels (C) into holes in panel [5]. Slot together with the rest of the structure as shown. Place 2x locking nuts (B) into holes

Watson 8 Cube Storage Unit

Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. mocka.co.nz | mocka.com.au A A x2 C B x2 Screw in 2x bolts (A) and insert 2x dowels (C) into holes in panel [6]. Slot together with the rest of the structure as shown. Place 2x locking nuts (B) into holes in the panels and tighten with screwdriver. C 6 B B 8 Slide panel [8] between the grooves on panels [5] and [6]

Watson 8 Cube Storage Unit

Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. mocka.co.nz | mocka.com.au D D D D D D D D D D 2 G G G G H H H 9 9 10 10 Insert 4 x nuts (H) into panel [10]. Attach panel [9] to panel [10] and secure with 4 x screws (G). Tighten with a screwdriver. C C Insert 10 x dowels (C) into panel [2]. Attach panel [2] to panels [5], [6] and [2] and secure with 10 x long scr

Watson 8 Cube Storage Unit

Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. mocka.co.nz | mocka.com.au Attach panel 10 to panel 2 with 8 long screws (D). Attach centre support leg (E) to panel 2. Attach screw (F) to centre support (E) as shown. D D D D D D D D 2 10 8 Flip unit over as shown slide panel [8] between the grooves on panels [5] and [6] to form the back of the unit as shown. 6

Mocka Indoor Furnishing Owners Instructions: