Parallax 28990 Quick Start Manual
Text of the manual
Web Site: www.parallax.com
Forums: forums.parallax.com
Sales: [email protected]
Technical: [email protected]
Office: (916) 624-8333
Fax: (916) 624-8003
Sales: (888) 512-1024
Tech Support: (888) 997-8267
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.3 1/16/2013 Page 1 of 17
Eddie Robot Platform
(Assembled: #28990 / Unassembled: #289
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.3 1/16/2013 Page 2 of 17
Additional Items Required
Laptop Computer
Kinect Camera
Philips (cross-head) screwdriver
Scissors
5/32” Allen wrench
Microsoft RDS software
A Keen Imagination
Important Precautions
After switching main board power off, wait at least
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 3 of 17
Bill of Materials
Part #
Quantity
Description
27971
1
Eddie Motor Mount and Wheel Kit w/ Quadrature Encoders
28971
2
Caster Wheel Kit
765-28977
1
Robot Base
765-28990
1
Eddie Second Deck
700-00235
1
Eddie Wiring Harness
721-00013
2
Kinect Mounting Cam Hook
452-00072
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 4 of 17
Step 3: Ping))) and IR Sensor Module assembly
Figure 3a shows the components for each sensor assembly. You will need a small Phillips screwdriver to
assemble each sensor module.
Figure 3a
Each Ping assembly consists of:
Each IR sensor assembly consists of:
(1) Pin
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 5 of 17
Place two ¼” long spacers onto the screws, and align the screws to the self-tapping mounting holes on
the acrylic stand. The screws will cut their own threads. Screw them all the way in, but do not over-
tighten.
Figure 3b
You should now have assemblies that lo
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 6 of 17
Step 4: Battery Shelf Preparation
Figure 4a
As shown in Figure 4a, the Battery Shelf components consist of a Delrin shelf, (6) 1/2” tall, round
aluminum standoffs, and (6) 4-40 x 5/8” screws.
The physical sizes of SLA batteries differ depending on brand and cap
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 7 of 17
Step 5: Main Base Assembly
Place the two pre-assembled Casters and Motor Mounts a shown in Figure 5a. Orient the Base Plate so
that the two sets of three holes (in a triangular pattern) are visible (“face-up”), as shown in Figure 5a.
These are “blind” hole
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 8 of 17
Figure 5b
Flip the Base over (as shown in Figure 5c), and attach each pre-assembled drive motor unit to the Base
using (2) ¼ x 20 button head screws for each motor, as shown. Tighten using a 5/32” Allen wrench.
Connect (2) long, three-pin servo extension cables
Copyright © Parallax Inc.
Eddie Robot Platform (28990 & 28992)
v1.1 1/16/2013 Page 9 of 17
Step 6: Control Standoff Assembly
Insert (8) 4-40 x 5/8” Black oxide screws from the underside of the Base, and fasten to the two sets of
(4) of standoffs, as shown in Figure 6a. The ½” long standoffs are for the Eddie Control Board, and the
1.5” standoffs