Rapid YJ-320T Use Manual

2-3. PAPER CHANG 2-4. SELF-TEST 2-5. DUMP MODE 3. CONNECTIONS 3-1. SERIAL/POWER INTERFACE 3-2. USB INTERFACE 3-3. THE OTHERS 4. OUTER APPEARANCE 5. COMMAND 5-１ CODE TABLE 5-２ EPSON COMMAND ...

communication, POS terminal and various system. Prior to actual use, please read this instruction manual carefully for your correct understanding. 1-1. Feature  Ultra small-sized rack mounting thermal printing  Extremely light weight  High speed printing  Pa ...

FONT SIZE 36/42COL ENGLISH: 9x24, KOREAN: 18x24 24/32COL ENGLISH: 12x24, KOREAN: 24x24 DOT DENSITY 200 DPI(8dot/mm) TOTAL DOTS 384 dots/line PRINT SPEED 70mm/sec PRINT PAPER 57mmx50mm ROLL PAPER PRINT WIDTH 48.0mm DATA BUFFE ...

 LED AND SWITCH ITEM FUNCTION RED LED POWER INDICATOR.  POWER ON, WHEN LIGHITNG LAMP. GREEN LED INDICATOR “ON-LINE”  ON LINE (STANDBY PRINTING.)  LAMP OFF( NOT TO PRINT).  LED FLASHING, WHEN NO PAPER FEED S/W PRESS TO ADVANCE PAPER 2-3. PAPER CHANG  This printer's paper is sensitive to external tempera ...

④ Make sure that the green LED is ON after loading the paper properly. ...

2-4. SELF TEST The self –test mode checks the printers control circuit function, setting parameter, software version, and printer quality. ① Before running the self -test, make sure there is sufficient paper. ② On pressing FEED S/W(YJ-350T/YJ-320T) or ONLINE S/W(YJ-360T), and power ...

Dump mode checks whether printer receives data correctly from the host or not. ① Before running the self -test, make sure there is sufficient paper. ② On pressing FEED S/W, and power ON, starting the self-test. ③ After ending the self-test, continually press FEED S/W, Then print “**[ HEX DUMP PRINT START ]**” after 2 seconds. ④ ...

1) Serial/Power cable number 2) Serial(RS-232C) signal function Pin SIG. DIRCTION FUNCTION 2 TXD OUT Transmitter data 3 RXD IN Receive data 6 DSR IN  Indicate Whether host could receive data or not .  Can do it on SPACE , not do it on MARK  Can operating on DSR/DTR Handshaking, printer transmi ...

3-2. USB INTERFACE(Option) 1) USB Connector number 2) USB signal function 3-3. THE OTHERS  Jumper Spec Pin No SIG DIRCTION FUNCTION 1 Vcc IN USB HOST form 5V input 2 D - IN/OUT Data send - 3 D + IN/OUT Data send + 4 - - N.U. 5 GND - Signal Ground Connector Spec : Mini B ...