Lumencor SOLA Instruction Manual

Light Engine® Instruction Manual Lumencor, Inc. Document Number 57-10027 www.lumencor.com ...

are traceable to all regulatory documentation, third party reports and certifications. “Regulatory Model: Sola” is used as a representative model for all certified and CE marked Sola Products. “Regulatory Models: Sola ...

1. Introduction 2. Precautions and Warnings 3. Installation and Operating Instructions 4. Spectral Output 5. Product Specifications 6. Routine Maintenance and Troubleshooting 7. Customer Support 8. Warranty SOLA and SOLA FISH Light Engine Instruction Manual �2 ...

developers of life science instrumentation. SOLA and SOLA FISH light engines generate white light output by combining the outputs of 4, 5 or 6 solid state light sources. The resulting output spectral distributions are shown ...

Warning: Statements identify conditions or practices that could result in personal injury. Avertissement: déclarations qui identifient des situations ou des pratiques susceptibles d’entraîner des blessures corporelles. Caution: Statements identify conditions or practices that coul ...

Warning: Possibly hazardous optical radiation emitted from this product. Do not look at operating lamp. Eye injury may result. Warning: Infrared (IR) emitted from this product. Do not look at operating lamp.  Avoid eye exposure. Use appropriate shielding or eye protection. Warning: UV emitted from this product. Avoid eye and skin exposur ...

ou les dommages au produit résultant d’une utilisation du SOLA ou SOLA FISH autre que celle prévue et du mépris total de toutes les mesures de sécurité et mises en garde affichées. 3. Operating Instructions 3.1 Contents SOLA and SOLA FISH light e ...

pedal, make sure the master electrical power switch is in the OFF position to avoid unintentional initiation of light output. After connecting the foot pedal, and with the light guide output safely directed into an enclosed optical path (e.g. microscope input collimator or a beam dump), turn the m ...

enclosed optical path (e.g. microscope input collimator or a beam dump). 5. Press the right button to turn the light output on. Illumination of the circular inlay in the manual light output control button on the SOLA or SOLA FISH front panel (top ...

should be in the OFF position. This is necessary to avoid manual override of serial on/off commands from the computer. 11. Run the GUI by going to the Program Menu and selecting LLE SOLA SE-2 Controller. 12. In the COM pulldown menu (GUI w ...