Opticon MDL-1000 Software Manual

Text of the manual

MDL – 1000 / 2000

Specification for Software Interface Laser Scan Engine with Built-in Decoder

Document:MDL-1000/2000 Specification for Software Interface

Admin No.: Publication.No. DM-0511015 / Doc.Control.No. SW06001 / Edition: 3rd Revision Collected: OPTOELECTRONICS CO.,LTD, Tsukagoshi, Saitama Pref. Distributed: Opticon Sensors Europe B.V., Hoofddorp CAUTION: This information is subject to change without

TABLE OF CONTENTS

1. ABSTRACT ...........................................................................................................7 2. OVERVIEW............................................................................................................8 3. INTERFACE.................................................

Table of Parameters.............................................................................................42

5-2 Common Elements to All Parameters ............................................

UPC-A Preamble (0x22).......................................................................................79

8-19-4 Enable/Disable UPC-E (0x02) ...........................................................................80 8-19-5 Transmit UPC-E Check Digits (0x29)...............................................

MSI Plessey Check Digit Algorithm (0x33).........................................................124

8-27 RSS (Reduced Space Symbology) ....................................................................125 8-27-1 Enable/Disable RSS-14 (0xF0 0x52) .................................................................

This specification provides interface specifications of an X1 laser scan engine with a built-in decoder

(“X1” is a tentative name of this product. This product shall be hereinafter called as “this scan engine”).

This scan engine is a compact laser scan engine with a built-in decoder, which is possible to be

installed in various handheld products such as handy terminals. The host system controls this scan engine and inputs scanned data in serial communication. This material provides information on the control method

Signals used to connect this scan engine and host system are as follows:

Signal Input/Output Function Notes RXD Input Serial Receive Data TXD Output Serial Transmit Data CTS Input Clear To Send Request for the host system to transmit the data at L-level RTS Output Request To Send Feasi

Other Measuring Instruments Manuals