Lorell LLR60126 Manual
Text of Lorell LLR60126 Manual
Workstation Hutch (for LLR60129)
Buffet pour station de travail (pour LLR60129)
Estación de trabajo (para 60129)
LLR60126/64850
LLR60126_64850_Manual.indd 1
LLR60126_64850_Manual.indd 1
3/4/11 5:22 PM
3/4/11 5:22 PM
PAGE 1 OF 27
INSTRUCTIONS:
If you are missing parts or have other concerns, please email [email protected] or fax: 404-472-9063.
Please provide the following information:
1. Full Name
2. Physical Address – do not include P.O. Box as our carriers cannot deliver to a P.O. Boxes
3. Phone Number
4. Model Number
5. Part Number
6. Invoice #
7. Date of Purchase
Note: Our policy is to send all parts requests normal ground transportation, if your requirements are
PAGE 2 OF 27
HARDWARE IDENTIFICATION
1. Cam Screw
33pcs
2. Double Cam
4pcs
3. Cam Lock
41pcs
4. Cam Cap
34pcs
5. Large Cam Cap
3pcs
6. Wooden Dowel
31pcs
7. Lock
1pc
8. Hinge
2pcs
9. Left CD Rack
1pc
10. Right CD Rack
1pc
11. Double Stick
Tape 2pcs
12. Small Screw
(For CD Rack)
12pcs
13. Middle Screw
(For Hinge)
8pcs
14. Large Screw
(For Lock)
4pcs
LLR60126_64850_Manual.indd 2
LLR60126_64850_Manual.indd 2
3/4/11 5:22 PM
3/4/11 5:22 PM
PAGE 3 OF 27
PANEL IDENTIFICATION
Top Panel 1pc
Left Side Panel 1pc
Fixed Shelf 1pc
Lower Back Panel 1pc
Left Divider Panel
1pc
Right Side Panel 1pc
Right Divider Panel
1pc
Upper Back Panel 1pc
Support Panel 1pc
Door Panel
1pc
LLR60126_64850_Manual.indd 3
LLR60126_64850_Manual.indd 3
3/4/11 5:22 PM
3/4/11 5:22 PM
PAGE 4 OF 27
ASSEMBLY INSTRUCTIONS:
STEP 1
With the Top Panel (A) laying on a non-abrasive
surface, insert 9 each Wooden Dowel (6) in the posi-
tions shown on the drawing. Tap securely into place
with a Rubber Mallet or Hammer.
On the Top Panel (A) insert with a Phillips Screw
Driver 11 each Cam Screw (1) in the positions shown
on the drawing.
STEP 2
On the Left Side Panel (B) install the Left CD Rack (9)
in the position shown on the drawing with 6 each Sm
PAGE 5 OF 27
STEP 4
On the Right Divider (E) insert 6 each Cam Lock (3) in
the hole position shown on the drawing. When inserting
the cam lock make sure that the arrow is facing toward
the cam screw entry.
STEP 5
On the Right Side Panel (C) insert with a Rubber Mallet
or Hammer 7 each Wooden Dowel (6). Tap securely
into place
On the Right Side Panel (C) insert 7 each Cam Screw
(1) into the position shown on the drawing with a
Phillips Screw Driver.
On the
PAGE 6 OF 27
STEP 7
On the Upper Back Panel (G) and Lower Back Panel
(H) insert the 22 each Cam Locks (3). When inserting
the cam lock ensure that the arrow is facing toward the
cam screw entry.
On the Upper Back Panel (G) insert with a Phillips
Screw Driver 4 each Cam Screws (1) in the positions
shown on the drawing.
STEP 8
On the Fixed Shelf (F) insert the 4 each Cam Screws (1)
in the hole position shown on the drawing.
On the same side of the Fixed Shel
PAGE 7 OF 27
D
Left Divider
Panel
E
Right Divider
Panel
G
Upper Back
Panel
D
Left Divider
Panel
E
Right Divider
Panel
G
Upper Back
Panel
2
6
I
Support Panel
F
Fixed Shelf
H
Lower Back
Panel
STEP 9
Install the Left Divider Panel (D) and Right Divider
Panel (E) onto the Upper Back Panel (G) so that the Cam
Screws (1) engage with the Cam Locks (3). Note that the
CD Rack located on the Left Divider Panel (D) should be
facing outward. With a Phillips Screw Driv
PAGE 8 OF 27
H
Lower Back
Panel
11
Double Stick Tape
F
Fixed Shelf
E
Right Divider
Panel
D
Left Divider
Panel
G
Upper Back
Panel
B
Left Side Panel
C
Right Side Panel
A
Top Panel
B
C
E
G
STEP 11
Attach the Left Side
Panel (B) while making
sure that all the Cam Screws
(1) and Wooden Dowels (6) properly
engage with the Cam Locks (3) and
holes as provided. With a Phillips Screw Driver
rotate the cam locks 1/2 turn clockwise until snug.
DO NOT OVERTIGHTEN
Attac